Space Shuttle Ultra 1.25 Revision B development

[SiameseCat]

I have the same issue Donamy's reporting - it looks like the attachments have been screwed up.

---------- Post added at 07:18 PM ---------- Previous post was at 07:04 PM ----------

The problem is that the orientation of the ET mesh has changed; the old mesh had the ET pointed along the z-axis (which is the 'standard' orientation, I think), while the new version has the long axis of the ET along the y-axis in Orbiter. I can change the attachment point values to work with the new mesh, or the mesh can be rotated to the old direction.

 

[DaveS]

I have the same issue Donamy's reporting - it looks like the attachments have been screwed up.

---------- Post added at 07:18 PM ---------- Previous post was at 07:04 PM ----------

The problem is that the orientation of the ET mesh has changed; the old mesh had the ET pointed along the z-axis (which is the 'standard' orientation, I think), while the new version has the long axis of the ET along the y-axis in Orbiter. I can change the attachment point values to work with the new mesh, or the mesh can be rotated to the old direction.

Try the new meshes I checked in. Given that I'm not experiencing these problems, these new meshes should fix the problem.

 

[Poscik]

Donamy, do you think you could try to make solid heat shield mesh? This temporary mesh is just shuttle belly cut out and scaled to be slightly larger. I wonder if these "drawings" are correctly describing maximum heating. Just for reference. However, DaveS has good TPS photo taken during STS-129 re-entry, so it may be usable.

 

[DaveS]

Donamy, do you think you could try to make solid heat shield mesh? This temporary mesh is just shuttle belly cut out and scaled to be slightly larger. I wonder if these "drawings" are correctly describing maximum heating. Just for reference. However, DaveS has good TPS photo taken during STS-129 re-entry, so it may be usable.

Just a note: The second image is of the orbiter during TAEM. And the tiles aren't glowing, they're reflecting the early morning sun-light. Based on the date/time-stamp, I would say that it is of the STS-121 landing on July 17 2006 at 9:15am EDT.

 

[Donamy]

DaveS, it's still broken. How can you not be having the problem when the ET mesh has been rotated ?

 

[DaveS]

DaveS, it's still broken. How can you not be having the problem when the ET mesh has been rotated ?

Don't know. Rev. 1140 has all the ET meshes rotated correctly. Are you sure that you have the rev. 1139 and 1140 meshes? Rev. 1140 fixes a slight texture bug on the SLWT mesh aft LH2 tank dome.

 

[Donamy]

Poscik, do you mean something like this ?

 

[Donamy]

Yes I have those meshes. Do they need to be renamed ?

 

[DaveS]

Here's a screenshot of the 1140 SLWT mesh:

---------- Post added at 03:29 AM ---------- Previous post was at 03:27 AM ----------

Yes I have those meshes. Do they need to be renamed ?

No.

 

[Donamy]

Same problem, you need to fix this.

 

[DaveS]

Same problem, you need to fix this.

I can't fix it as there's nothing wrong! I can't reproduce the problem at all. As you can see in the screenshot, the ET is fine. The only conclusion I can draw is that there's something wrong on your end as mine is fine.

Try this scenario. It is what I used to create that screenshot.

BEGIN_DESC
Contains the latest simulation state.
END_DESC

BEGIN_ENVIRONMENT
  System Sol
  Date MJD 
  Context SSU
END_ENVIRONMENT

BEGIN_FOCUS
  Ship LC39A
END_FOCUS

BEGIN_CAMERA
  TARGET LC39A
  MODE Extern
  POS 3.31 -0.51 -70.39
  TRACKMODE Ground Earth
  GROUNDLOCATION -80.60294 28.60643 4.63
  GROUNDDIRECTION -241.79 12.61
  FOV 14.50
  BEGIN_PRESET
    Ground:LC39A:20.00:Earth -80.60006 28.60820 11.53 -3.19 0.12
    Ground:LC39A:14.50:Earth -80.60294 28.60643 4.63 -4.22 0.22
    Ground:LC39A:10.00:Earth -80.60739 28.61049 3.44 -6.93 0.12
    Ground:LC39A:20.00:Earth -80.59994 28.61105 4.68 -2.51 0.10
    Ground:LC39A:16.97:Earth -80.60411 28.60561 35.05 1.58 0.06
    Ground:LC39A:15.15:Earth -80.60462 28.60567 4.22 1.39 0.16
    Ground:LC39A:20.00:Earth -80.60301 28.60943 30.09 -2.33 0.17
    Ground:LC39A:40.00:Earth -80.60437 28.60829 43.04 0.00 -0.05
    Ground:LC39A:40.00:Earth -80.60376 28.60730 19.00 1.84 0.23
    Ground:LC39A:40.00:Earth -80.60436 28.60831 79.76 -6.26 -0.97
    Ground:LC39A:10.00:Earth -80.60434 28.60843 67.73 -6.50 -0.06
  END_PRESET
END_CAMERA

BEGIN_MFD Right
  TYPE Orbit
  PROJ Ship
  FRAME Equator
  ALT
  REF Earth
END_MFD

BEGIN_SHIPS
LC39A:SSU_Pad
  STATUS Landed Earth
  POS -80.6041120 28.6083650
  HEADING 270.00
  AFCMODE 7
  PRPLEVEL 0:0.000139 1:1.000000
  THLEVEL 0:0.198000 1:0.198000
  NAVFREQ 0 0
  ACCESS_ARM 1 1.0000
  GVA 1 1.0000
  VENTHOOD 1 1.0000
  RSS 1 1.0000
  FSS_GH2 0 0.0000
  FSS_IAA 0 0.0000
  RBUS -1 0.0000
  GOX_SEQUENCE 2
  SHUTTLE Endeavour
END
MLP-2:SSU_MLP
  STATUS Landed Earth
  POS -80.6040620 28.6084030
  HEADING 0.00
  ATTACHED 0:0,LC39A
  AFCMODE 7
  NAVFREQ 0 0
  T0_UMB 0 0.0000
END
LCC:SSU_LCC
  STATUS Landed Earth
  POS -80.6040745 28.6083855
  HEADING 270.00
  AFCMODE 7
  NAVFREQ 0 0
  LAUNCH_MJD 55696.556979
  PAD_NAME LC39A
  SHUTTLE_NAME Endeavour
END
Endeavour:SpaceShuttleUltra
  STATUS Landed Earth
  POS -80.6232502 28.6197342
  HEADING 0.00
  ATTACHED 0:0,MLP-2
  AFCMODE 7
  PRPLEVEL 0:0.000000 1:1.000000 2:1.000000 3:1.000000 4:1.000000 5:1.000000 6:1.000000 7:1.000000 8:0.999000 11:0.020000
  THLEVEL 3:1.000000 4:1.000000 5:1.000000
  NAVFREQ 0 0
  MISSION STS-134
  CONFIGURATION 0
  MET 0.000000
  WING_NAME Endeavour
  GEAR 0 0.0000
  OPS 101
  AUTOPILOT 28.608385 10.000000 105000.000000 7869.635088 0.747083
  ASSIST 0.000000 0.000000
  THROTTLE_BUCKET 834.000000 1174.000000
  HEADS_UP 100000.000000
  TGT_ID 2
  BODY_VECT 3
  ROLL 0.000000
  PITCH 0.000000
  YAW 0.000000
  P_ANGLE 0.000000
  Y_ANGLE 0.000000
  OM_ANGLE -1.000000
  DAP MODE 0 0
  ROT MODE 0 0 0
  TRANS MODE 0 0 0
  CONTROL MODE 0
   PAYLOAD CACTIVE1 8.000000 0.000000 0
   PAYLOAD CACTIVE2 0.000000 0.000000 0
   PAYLOAD CACTIVE3 -8.000000 0.000000 0
   PAYLOAD CPASSIVE1 4.000000 0.000000 0
   PAYLOAD CPASSIVE2 2.000000 0.000000 0
   PAYLOAD CPASSIVE3 -6.000000 0.000000 0
   PAYLOAD CPASSIVE4 7.000000 0.000000 0
   PAYLOAD PORT1 3.000000 0.000000 0
   PAYLOAD PORT2 -2.000000 0.000000 0
   PAYLOAD PORT3 -8.000000 0.000000 0
   PAYLOAD PORT4 7.000000 0.000000 0
   PAYLOAD STBD1 3.000000 0.000000 0
   PAYLOAD STBD2 -2.000000 0.000000 0
   PAYLOAD STBD3 -8.000000 0.000000 0
   PAYLOAD STBD4 0.000000 0.000000 0
  MPSGOXVENT 1
  PLBD_CAM 90.0000 -90.0000 90.0000 90.0000 90.0000 90.0000 90.0000 -90.0000
  PLB_LIGHTS 0
@SUBSYSTEM MPS_C
@ENDSUBSYSTEM		;MPS_C
@SUBSYSTEM MPS_L
@ENDSUBSYSTEM		;MPS_L
@SUBSYSTEM MPS_R
@ENDSUBSYSTEM		;MPS_R
@SUBSYSTEM FMC1
@ENDSUBSYSTEM		;FMC1
@SUBSYSTEM FMC2
@ENDSUBSYSTEM		;FMC2
@SUBSYSTEM FMC3
@ENDSUBSYSTEM		;FMC3
@SUBSYSTEM MMC1
@ENDSUBSYSTEM		;MMC1
@SUBSYSTEM MMC2
@ENDSUBSYSTEM		;MMC2
@SUBSYSTEM MMC3
@ENDSUBSYSTEM		;MMC3
@SUBSYSTEM MMC4
@ENDSUBSYSTEM		;MMC4
@SUBSYSTEM AMC1
@ENDSUBSYSTEM		;AMC1
@SUBSYSTEM AMC2
@ENDSUBSYSTEM		;AMC2
@SUBSYSTEM AMC3
@ENDSUBSYSTEM		;AMC3
@SUBSYSTEM FF1
@ENDSUBSYSTEM		;FF1
@SUBSYSTEM FF2
@ENDSUBSYSTEM		;FF2
@SUBSYSTEM FF3
@ENDSUBSYSTEM		;FF3
@SUBSYSTEM FF4
@ENDSUBSYSTEM		;FF4
@SUBSYSTEM FA1
@ENDSUBSYSTEM		;FA1
@SUBSYSTEM FA2
@ENDSUBSYSTEM		;FA2
@SUBSYSTEM FA3
@ENDSUBSYSTEM		;FA3
@SUBSYSTEM FA4
@ENDSUBSYSTEM		;FA4
@SUBSYSTEM PL1
@ENDSUBSYSTEM		;PL1
@SUBSYSTEM PL2
@ENDSUBSYSTEM		;PL2
@SUBSYSTEM LF1
@ENDSUBSYSTEM		;LF1
@SUBSYSTEM LM1
@ENDSUBSYSTEM		;LM1
@SUBSYSTEM LA1
@ENDSUBSYSTEM		;LA1
@SUBSYSTEM OF1
@ENDSUBSYSTEM		;OF1
@SUBSYSTEM OF2
@ENDSUBSYSTEM		;OF2
@SUBSYSTEM OF3
@ENDSUBSYSTEM		;OF3
@SUBSYSTEM OF4
@ENDSUBSYSTEM		;OF4
@SUBSYSTEM OA1
@ENDSUBSYSTEM		;OA1
@SUBSYSTEM OA2
@ENDSUBSYSTEM		;OA2
@SUBSYSTEM OA3
@ENDSUBSYSTEM		;OA3
@SUBSYSTEM LL1
@ENDSUBSYSTEM		;LL1
@SUBSYSTEM LL2
@ENDSUBSYSTEM		;LL2
@SUBSYSTEM LR1
@ENDSUBSYSTEM		;LR1
@SUBSYSTEM LR2
@ENDSUBSYSTEM		;LR2
@SUBSYSTEM EIU1
@ENDSUBSYSTEM		;EIU1
@SUBSYSTEM EIU2
@ENDSUBSYSTEM		;EIU2
@SUBSYSTEM EIU3
@ENDSUBSYSTEM		;EIU3
@SUBSYSTEM MTU
  MET_RUNNING 0
  MET0 0.000000
  MET1 0.000000
  MET2 0.000000
EVENT_TIMER0 0.000000 DOWN STOPPED
EVENT_TIMER1 0.000000 DOWN STOPPED
@ENDSUBSYSTEM		;MTU
@SUBSYSTEM IDP1
  IDP1 SPEC 65535
  IDP1 DISP 65535
@ENDSUBSYSTEM		;IDP1
@SUBSYSTEM IDP2
  IDP2 SPEC 65535
  IDP2 DISP 65535
@ENDSUBSYSTEM		;IDP2
@SUBSYSTEM IDP3
  IDP3 SPEC 65535
  IDP3 DISP 65535
@ENDSUBSYSTEM		;IDP3
@SUBSYSTEM IDP4
  IDP4 SPEC 65535
  IDP4 DISP 65535
@ENDSUBSYSTEM		;IDP4
@SUBSYSTEM IMU1
@ENDSUBSYSTEM		;IMU1
@SUBSYSTEM IMU2
@ENDSUBSYSTEM		;IMU2
@SUBSYSTEM IMU3
@ENDSUBSYSTEM		;IMU3
@SUBSYSTEM GPC1
@ENDSUBSYSTEM		;GPC1
@SUBSYSTEM GPC2
@ENDSUBSYSTEM		;GPC2
@SUBSYSTEM GPC3
@ENDSUBSYSTEM		;GPC3
@SUBSYSTEM GPC4
@ENDSUBSYSTEM		;GPC4
@SUBSYSTEM GPC5
@ENDSUBSYSTEM		;GPC5
@SUBSYSTEM SimpleGPCSystem
  @BEGINSOFTWARE OrbitDAP
  TGT_ID 2
  BODY_VECT 1
  ROLL 0.000000
  PITCH 0.000000
  YAW 0.000000
  P_ANGLE 0.000000
  Y_ANGLE 0.000000
  OM_ANGLE -1.000000
  DAP_MODE 0 0
  ROT_MODE 0 0 0
  TRANS_MODE 0 0 0
  CONTROL_MODE 1
  @ENDSOFTWARE 
  @BEGINSOFTWARE OMSBurnSoftware
  PEG7 0.000000 0.000000 0.000000
  WT 0.000000
  TIG 0 0 0 0.0
  TV_ROLL 0.000000
  MNVR 0 0
  @ENDSOFTWARE 
  @BEGINSOFTWARE AerojetDAP
  @ENDSOFTWARE 
@ENDSUBSYSTEM		;SimpleGPCSystem
@SUBSYSTEM ODS
  RING_STATE -1 0.0000
@ENDSUBSYSTEM		;ODS
@SUBSYSTEM ADPS
  LEFT_AIRDATAPROBE 0 0 1.000000
  RIGHT_AIRDATAPROBE 0 0 1.000000
@ENDSUBSYSTEM		;ADPS
@SUBSYSTEM ETUmbDoors
  ET_DOORS 1.000000 1.000000
  ET_DOOR_LATCHES 0.000000 1.000000 1.000000
@ENDSUBSYSTEM		;ETUmbDoors
@SUBSYSTEM -YStarTrackerDoorMotor
@ENDSUBSYSTEM		;-YStarTrackerDoorMotor
@SUBSYSTEM -ZStarTrackerDoorMotor
@ENDSUBSYSTEM		;-ZStarTrackerDoorMotor
@SUBSYSTEM ACBusSystem
@ENDSUBSYSTEM		;ACBusSystem
@SUBSYSTEM INVERTER1
@ENDSUBSYSTEM		;INVERTER1
@SUBSYSTEM INVERTER2
@ENDSUBSYSTEM		;INVERTER2
@SUBSYSTEM INVERTER3
@ENDSUBSYSTEM		;INVERTER3
@SUBSYSTEM APU1
  APU1_State 0
  APU1_FuelPress 0.000000
  APU1_HydPress 0.000000
  APU1_Speed 0.000000
@ENDSUBSYSTEM		;APU1
@SUBSYSTEM APU2
  APU2_State 0
  APU2_FuelPress 0.000000
  APU2_HydPress 0.000000
  APU2_Speed 0.000000
@ENDSUBSYSTEM		;APU2
@SUBSYSTEM APU3
  APU3_State 0
  APU3_FuelPress 0.000000
  APU3_HydPress 0.000000
  APU3_Speed 0.000000
@ENDSUBSYSTEM		;APU3
@SUBSYSTEM WSB1
@ENDSUBSYSTEM		;WSB1
@SUBSYSTEM WSB2
@ENDSUBSYSTEM		;WSB2
@SUBSYSTEM WSB3
@ENDSUBSYSTEM		;WSB3
@SUBSYSTEM LATCH0
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM		;LATCH0
@SUBSYSTEM LATCH1
  LATCH1_ATTACHED_PAYLOAD CISS_CentaurG_Prime 0
  LATCH_STATE1 0 0.0000
  LATCH_STATE2 0 0.0000
  LATCH_STATE3 0 0.0000
  LATCH_STATE4 0 0.0000
  LATCH_STATE5 0 0.0000
@ENDSUBSYSTEM		;LATCH1
@SUBSYSTEM LATCH2
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM		;LATCH2
  CRT_SEL 0 1
  @PANEL F2
  "F2_PITCH_AUTO" 0
  "F2_PITCH_CSS" 0
  "F2_RY_AUTO" 0
  "F2_RY_CSS" 0
  @ENDPANEL 
  @PANEL F4
  "F4_PITCH_AUTO" 0
  "F4_PITCH_CSS" 0
  "F4_RY_AUTO" 0
  "F4_RY_CSS" 0
  @ENDPANEL 
  @PANEL F6
  "Cdr Flt Cntlr Pwr" OFF
  @ENDPANEL 
  @PANEL F7
  @ENDPANEL 
  @PANEL F8
  "Plt Flt Cntlr Pwr" OFF
  @ENDPANEL 
  @PANEL R2
  "Boiler1 N2 Supply" ON
  "Boiler2 N2 Supply" ON
  "Boiler3 N2 Supply" ON
  "Boiler1 Cntlr" ON
  "Boiler2 Cntlr" ON
  "Boiler3 Cntlr" ON
  "Boiler1 Cntlr Pwr/Htr" A
  "Boiler2 Cntlr Pwr/Htr" A
  "Boiler3 Cntlr Pwr/Htr" A
  "APU1 Run" OFF
  "APU2 Run" OFF
  "APU3 Run" OFF
  "Hyd Main Pump Press 1" LOW
  "Hyd Main Pump Press 2" LOW
  "Hyd Main Pump Press 3" LOW
  "APU1 Cntlr Pwr " OFF
  "APU2 Cntlr Pwr " OFF
  "APU3 Cntlr Pwr " OFF
  "APU1 Fuel Tank Valve" CLOSE
  "APU2 Fuel Tank Valve" CLOSE
  "APU3 Fuel Tank Valve" CLOSE
  "ET Umb Centerline Latch" GND
  "ET Umb Left Door" OFF
  "ET Umb Left Door Latch" OFF
  "ET Umb Right Door" OFF
  "ET Umb Right Door Latch" OFF
  "MPS Pwr Left AC2" [1]
  "MPS Pwr Ctr AC1" [1]
  "MPS Pwr Right AC3" [1]
  "MPS Pwr Left AC3" [1]
  "MPS Pwr Ctr AC2" [1]
  "MPS Pwr Right AC1" [1]
  "MPS He Isol A Left" OPEN
  "MPS He Isol A Ctr" OPEN
  "MPS He Isol A Right" OPEN
  "MPS He Isol B Left" OPEN
  "MPS He Isol B Ctr" OPEN
  "MPS He Isol B Right" OPEN
  @ENDPANEL 
  @PANEL C3
  "LOMS Arm" ARM/PRESS
  "ROMS Arm" ARM/PRESS
  "LADP Stow Enable" INHIBIT
  "RADP Stow Enable" INHIBIT
  "LADP Deploy" STOW
  "RADP Deploy" STOW
  @ENDPANEL 
  @PANEL O6
  "L GLRSHLD FLOOD" VAR
  "S TRK DR CNTL SYS1" OFF
  "S TRK DR CNTL SYS2" OFF
  "GPC_POWER_1_COVER" [0]
  "GPC_POWER_2_COVER" [0]
  "GPC_POWER_3_COVER" [0]
  "GPC_POWER_4_COVER" [0]
  "GPC_POWER_5_COVER" [0]
  "GPC POWER 1" ON
  "GPC POWER 2" ON
  "GPC POWER 3" ON
  "GPC POWER 4" ON
  "GPC POWER 5" ON
  "GPC_OUTPUT_1_COVER" [0]
  "GPC_OUTPUT_2_COVER" [0]
  "GPC_OUTPUT_3_COVER" [0]
  "GPC_OUTPUT_4_COVER" [0]
  "GPC_OUTPUT_5_COVER" [0]
  "GPC OUTPUT 1" NORMAL
  "GPC OUTPUT 2" NORMAL
  "GPC OUTPUT 3" NORMAL
  "GPC OUTPUT 4" NORMAL
  "GPC OUTPUT 5" NORMAL
  "IPL SOURCE" OFF
  "GPC MODE 1" STBY
  "GPC MODE 2" STBY
  "GPC MODE 3" STBY
  "GPC MODE 4" STBY
  "GPC MODE 5" STBY
  @ENDPANEL 
  @PANEL R11
  @ENDPANEL 
  @PANEL A6
  "SENSE" -X
  "Aft Flt Cntlr Pwr" OFF
  "Payload Ret Latch 1" OFF
  "Payload Ret Latch 2" OFF
  "Payload Ret Latch 3" OFF
  "Payload Ret Latch 4" OFF
  "Payload Ret Latch 5" OFF
  "Payload Select" 1
  @ENDPANEL 
  @PANEL AftMDU
  @ENDPANEL 
  @PANEL A7U
  @ENDPANEL 
  @PANEL A7A3/A8A3
  "SYSTEM POWER MNA" [1]
  "SYSTEM POWER MNB" [1]
  "PYRO POWER MNA" [0]
  "PYRO POWER MNC" [0]
  "SYS1 VENT ISOL" [1]
  "SYS1 VENT" [1]
  "SYS2 VENT ISOL" [1]
  "SYS2 VENT" [1]
  "PSU POWER MNA" [0]
  "PSU POWER MNB" [0]
  "LIGHTS AIRLOCK 1-4" [0]
  "LIGHTS AIRLOCK 2-3" [0]
  "LIGHTS DOCKING TRUSS FWD" [0]
  "LIGHTS DOCKING TRUSS AFT" [0]
  "ARLK/TNL FAN A" [0]
  "ARLK/TNL FAN B" [0]
  "LIGHTS C/L VESTIBULE PORT" [0]
  "LIGHTS C/L VESTIBULE STBD" [0]
  "CNTL PNL PWR A" OFF
  "CNTL PNL PWR B" OFF
  "CNTL PNL PWR C" OFF
  "HTRS/DCU PWR H1" OFF
  "HTRS/DCU PWR H2/DCU" OFF
  "HTRS/DCU PWR H3/DCU" OFF
  "APDS PWR A" OFF
  "APDS PWR B" OFF
  "APDS PWR C" OFF
  "PYROS Ap" [0]
  "PYROS Bp" [0]
  "PYROS Cp" [0]
  @ENDPANEL 
END
ET:SSU_SLWT
  STATUS Landed Earth
  POS 0.0000000 0.0000000
  HEADING -23319879814882082000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000.00
  ATTACHED 0:20,Endeavour
  AFCMODE 7
END
LSRB:SSU_LSRB
  STATUS Landed Earth
  POS 0.0000000 0.0000000
  HEADING 0.00
  ATTACHED 0:21,Endeavour
  AFCMODE 7
  PRPLEVEL 1:1.000000
  SECTION_COUNT 5
END
RSRB:SSU_RSRB
  STATUS Landed Earth
  POS -0.0000000 -0.0000000
  HEADING -0.00
  ATTACHED 0:22,Endeavour
  AFCMODE 7
  PRPLEVEL 1:1.000000
  SECTION_COUNT 5
END
END_SHIPS

 

[Donamy]

Ok renaming 'SLWT.msh.r1140' to 'SLWT.msh' and the new .dll fixed the problem with the ET, but the Launch pad is still screwed up. Do I need to rename something else for that to work ?

 

[DaveS]

Ok renaming 'SLWT.msh.r1140' to 'SLWT.msh' and the new .dll fixed the problem with the ET, but the Launch pad is still screwed up. Do I need to rename something else for that to work ?

OK good. The problem with the pad is probably that the mesh-group numbers are different between the module and the mesh/es.

Which version of the pad is being used? The modern one or the 1980's version?

 

[Donamy]

What will tell me that ?

 

[DaveS]

What will tell me that ?

Does the FSS have a large crane on top it? And a yellow structure on the platform in between the FSS and RSS?

 

[Donamy]

No ! Can you go on messenger ?

 

[DaveS]

Updated pad sources have been checked that fixes the reported animation problems.

 

[Donamy]

check in that scenario to Dave.

---------- Post added at 03:07 AM ---------- Previous post was at 02:41 AM ----------

The burnt ET doesn't seem to be working again.

 

[DaveS]

check in that scenario to Dave.

---------- Post added at 03:07 AM ---------- Previous post was at 02:41 AM ----------

The burnt ET doesn't seem to be working again.

Checked in a new set of ET meshes that should fix this problem.

 

[Poscik]

Yes I have those meshes. Do they need to be renamed ?

No, they don't I'll adapt the code for your meshes. No problem at all :thumbup: