Search results

You can adjust the brightness of the nightlights on the Options tab. Default is 0.5 with a range between 0 and 1.

No, just use the switch below the Digital Readout (DRO) to switch between MET and GMT.

I don't think there is as the checklists are very good at calling out when to expect MA's as part of the procedure (see MPS ISOL and APU/HYD SHUTDN in the Ascent checklist). And none of the R4 switches are implemented at all.

So no Post-Insertion CONFIG GPCs FOR OPS 2?

For on-orbit burns, you want the procedures outlined in the generic Orbit Ops checklist, page 9-2, ON-ORBIT OMS BURN. The Ascent checklist will tell you when it is time to head over to the mission's Post-Insertion checklist. Once the PI checklist is complete, all operations is governed by their...

Something else that I have just noticed is that cloud shadows only cast on planetary surfaces, not any base objects or vessels. So that's another thing that needs to be looked at.

To access the D3D9Client Advanced Setup dialog, click on Video, then make sure D3D9Client is selected where it says "Graphics engine", then click on the Advanced button. Also, make sure you're running Orbiter_NG, not Orbiter! External graphics clients such as D3D9Client will not work with...

Make sure "Custom Camera" in the D3D9Client Advanced Setup dialog is set to "Enabled".

Make sure your antivirus program isn't eating any files by false positives.

First time that happened was on May 24 2000 when the first Atlas III launched from SLC-36B at Cape Canaveral Air Force Station (CCAFS). The Atlas III served as a bridge between the Atlas II and the oncoming Atlas V EELV.

New VAB and LCC, complete with all four Firing Rooms and their electrically operated louvers:

This one: https://commons.erau.edu/cgi/viewcontent.cgi?article=2439&context=space-congress-proceedings

This is what I have on the SSP for the PAMs:

@GLS: I think I can report some good news for a change! I think I have found the source of all my "unexplained CTDs". Turns out a C++ Runtime file had become corrupted, in this case ucrtbased.dll. I found this out while being fortunate enough to trap a CTD-up-loading in the VS debugger, which...

The Cape terrain in Orbiter might look flat but absolutely isn't. It's riddled with uneven spots.

Got this old schematic which shows the keel pin of the PAM ASE being located slightly aft of the FWD trunnion pins:

Should plain "J" key.

How close are you longitudinally? You have to pretty much be spot on and the LDS only helps with the lateral alignment. This is why they have ground observers stationed in the baskets of the mounts, equipped with radios in direct contact with the driver.

It happens sometimes when the ENGINE POWER switches are taken to the OFF position. Harmless, just means that the GPCs can't communicate with the Main Engine Controller on that particular engine anymore. Usually happens if the GPCs and MEC was talking when the MEC was powered down so the GPCs...

Scrub for today to address a COPV leak: