OHM AA-Missile 0.98

[OrbitHangar]

Author: topper0710

Launch your Air to Air Aim120 Missile from your Aircraft !

New in 0.98
   - Explosion effects added
   - New smoketrail
   - more realistic range (range has been reduced a bit)
   - Speed is dependig on the target speed, and not longer limited to 1100 m/s
   - The MFD has been reworked
      o Heading of the targets is shown now
      o Zoom is displayed
      o some other changes
   - Some bugs has been fixed

New in 0.972
    - CTD during loading the missiles has been fixed
    - some other little bugs fixed
    - reorganisation of the sdk folder (relativ links to headders and libs)

New in 0.971
    - dll replaced by the right one

New in 0.97
    - More Bugs fixed
 
New in 0.96
    - Works in Orbiter 2010
    - New "radarlike" MFD
    - Many Bugs fixed
    - Reorganisation of the source code
    - Launching a missile inside itself is now possible (if the missile is attached to a carrier)
    - Smoketrail added
    - Reentryflame removed

Known Bugs:

    - CTD, by trying to launch a missile inside itself (focus on the missile), if the missile is not attached to a port

Please read the included "ReadMeFirst.txt" !!


DOWNLOAD

 

[James.Denholm]

Awesomely improved since the last version.

 

[OrbitHangar]

Legacy Reviews

Legacy Add-on Reviews from Orbit Hangar Mods


Review by slycoopersbutt
Pros: A lot of heat-seeking fun
Cons: Can be buggy in some ways
Review:
It's quite good and simple to use. It does very much like described. Just get within a reasonable distance to whatever you want to see no more of in Your Orbiter session and let the missile fly!


Review by washington kuhlmann
Pros: Fun , Expands Possibilites of the Sim
Cons: Beligerant Theme , Hard to install, Need addons, See below
Review:
Interesting how gettting into dogfighting shows even more the amazing simulator that Orbiter really is, how reallistic are the needed engaging/ framing maneuvers and how beautifully realistic they feel and look in the sim. However a few points should be indicated as schedule items for the development. *Not only MSVCR70.dll but MSVCP70.dll are needed and not all versions work I finally came to MSVCP70.dll Version 7.00.9064.0 MSVCR70.dll Version 7.00.9064.0 Since there are more recent versions of these libraries why not use them? *For the same reason I can't see why the older version of OrbiterSound ( 3 instead of more recent 3.5) appears in the source. *Why there's "ShuttlePB".exp and lib in Modules? If they are necessary, these files should be renamed to match the addon name ("AAMissile" or else). *An all-Deltaglider (or any default craft)scenario should be provided. The user should not be required to download other addon to test this one. *If the target has loaded missiles , these remain flying after the target has been eliminated. Delete missiles from deleted aircraft.


Review by sasuke767
Pros: Easy to use
Cons: a bit buggy
Review:
like slycoopersbutt said, it does what it said. It would be nice that when it hit the target, it deletes the ship and replaces it with debris but that doesnt matter since it is an excellent addon. Bravo!


Review by dallatorretdu
Pros: USE IT WHIT Apache ver 3
Cons: HOW DO IT?
Review:
I have a problem, how i can use this missile whit the apache ver3? (the apache-AH6a) i have added the line in the cfg file of attachament, but he don't go...i press load, but the 2 missiles don't come. I have added this BEGIN_K33\K-AH-64A AIM120_1_POS 1.60 -0.71 1.90 AIM120_2_POS -1.60 -0.71 1.90 END_K33\K-AH-64A Why he don't work?


Review by axel
Review:
Nothing happens, if i use Missile-MFD or LShift+L or LShift-S. Only targeting works.

 

[dallatorretdu]

PROBLEM whit this

i'm new for this
i can't use your missile whit other models WHY?
i have modified the missile attachament.cfg, now contains:

;PLEASE DONT ADD COMMENTS BETWEEN BEGIN AND END!
;
;
;EXAMPLE:
;
;BEGINT_VesselClassName
; MISSILENAME_N_POS
; ...
;END_VesselClassName
;
;(Missilename and Pos will be ignored in this current vesion Beta 0.95)
;You always get AIM120
;

BEGIN_Deltaglider
AIM120_1_POS -5.7 -0.95 -3
AIM120_2_POS 5.7 -0.95 -3
AIM120_3_POS -6.3 -0.85 -3
AIM120_4_POS 6.3 -0.85 -3
END_Deltaglider
BEGIN_DeltaGlider
AIM120_1_POS -5.7 -0.95 -3
AIM120_2_POS 5.7 -0.95 -3
AIM120_3_POS -6.3 -0.85 -3
AIM120_4_POS 6.3 -0.85 -3
END_DeltaGlider
BEGIN_DG-S
AIM120_1_POS -5.7 -0.95 -3
AIM120_2_POS 5.7 -0.95 -3
AIM120_3_POS -6.3 -0.85 -3
AIM120_4_POS 6.3 -0.85 -3
END_DG-S

BEGIN_K33K-F-15A
AIM120_1_POS -1.7 -0.7 0.6
AIM120_2_POS 1.7 -0.7 0.6
AIM120_3_POS -2.1 -0.7 0.0
AIM120_4_POS 2.1 -0.7 0.0
AIM120_5_POS -2.5 -0.7 -0.6
AIM120_6_POS 2.5 -0.7 -0.6
END_K-F-15A:K33K-F-15A
BEGIN_K33K-F-15A-NASA
AIM120_1_POS -1.7 -0.7 0.6
AIM120_2_POS 1.7 -0.7 0.6
AIM120_3_POS -2.1 -0.7 0.0
AIM120_4_POS 2.1 -0.7 0.0
AIM120_5_POS -2.5 -0.7 -0.6
AIM120_6_POS 2.5 -0.7 -0.6
END_K33K-F-15A
BEGIN_K33K-Mirage2000
AIM120_1_POS -2.2 -1.3 -1.5
AIM120_2_POS 2.2 -1.3 -1.5
AIM120_3_POS -2.5 -1.3 -1.5
AIM120_4_POS 2.5 -1.3 -1.5
END_K33K-Mirage2000
BEGIN_K33K-AH-64A
AIM120_1_POS 1.60 -0.71 1.90
AIM120_2_POS -1.60 -0.71 1.90
END_K33K-AH-64A
BEGIN_DeltaGliderIV
AIM120_1_POS -5.7 -0.95 -3
AIM120_2_POS 5.7 -0.95 -3
AIM120_3_POS -6.3 -0.85 -3
AIM120_4_POS 6.3 -0.85 -3
END_DeltaGliderIV

where i wrong?

he doesen't go whit the DG IV and the apache ver 3
whi?

 

[Topper]

Can you try to let an empty line before end of file?
This file is working on my installation:

;PLEASE DONT ADD COMMENTS BETWEEN BEGIN AND END!
;
;
;EXAMPLE:
;
;BEGINT_VesselClassName
;    MISSILENAME_N_POS
;    ...
;END_VesselClassName
;
;(Missilename and Pos will be ignored in this current vesion Beta 0.95)
;You always get AIM120
;



BEGIN_Deltaglider
   AIM120_1_POS  -5.7 -0.95 -3
   AIM120_2_POS  5.7 -0.95 -3
   AIM120_3_POS -6.3 -0.85 -3
   AIM120_4_POS  6.3 -0.85 -3
END_Deltaglider

BEGIN_DeltaGlider
   AIM120_1_POS  -5.7 -0.95 -3
   AIM120_2_POS  5.7 -0.95 -3
   AIM120_3_POS -6.3 -0.85 -3
   AIM120_4_POS  6.3 -0.85 -3
END_DeltaGlider

BEGIN_DG-S
   AIM120_1_POS  -5.7 -0.95 -3
   AIM120_2_POS  5.7 -0.95 -3
   AIM120_3_POS -6.3 -0.85 -3
   AIM120_4_POS  6.3 -0.85 -3
END_DG-S


BEGIN_K33\K-F-15A
   AIM120_1_POS  -1.7 -0.7 0.6
   AIM120_2_POS  1.7 -0.7 0.6
   AIM120_3_POS -2.1 -0.7 0.0
   AIM120_4_POS  2.1 -0.7 0.0
   AIM120_5_POS -2.5 -0.7 -0.6
   AIM120_6_POS  2.5 -0.7 -0.6
END_K-F-15A:K33\K-F-15A

BEGIN_K33\K-F-15A-NASA
   AIM120_1_POS  -1.7 -0.7 0.6
   AIM120_2_POS  1.7 -0.7 0.6
   AIM120_3_POS -2.1 -0.7 0.0
   AIM120_4_POS  2.1 -0.7 0.0
   AIM120_5_POS -2.5 -0.7 -0.6
   AIM120_6_POS  2.5 -0.7 -0.6
END_K33\K-F-15A

BEGIN_K33\K-Mirage2000
   AIM120_1_POS  -2.2 -1.3 -1.5
   AIM120_2_POS  2.2 -1.3 -1.5
   AIM120_3_POS -2.5 -1.3 -1.5
   AIM120_4_POS  2.5 -1.3 -1.5
END_K33\K-Mirage2000

BEGIN_K33\K-AH-64A
   AIM120_1_POS 1.60 -0.71 1.90
   AIM120_2_POS -1.60 -0.71 1.90
END_K33\K-AH-64A
          
BEGIN_K33\K-AH-64
   AIM120_1_POS 1.60 -0.71 1.90
   AIM120_2_POS -1.60 -0.71 1.90
END_K33\K-AH-64

 

[dallatorretdu]

ok, i try it now, tank you, i haven't much of time, hy i need to create an re-entry tutorial for DG IV.

 

[Topper]

Hi,
can someone say me if the new Version is working?

 

[IronRain]

Not working for me. As soon as I want to load a rocket I get a CTD. Also with all modules turned off (except AAmissle). No matter which scenario I try

 

[Scruce]

Not working for me. As soon as I want to load a rocket I get a CTD. Also with all modules turned off (except AAmissle). No matter which scenario I try

Works fine on O2010-P1

 

[Carmen A]

That's it, I'm going to organise some Top Gun for OMP

 

[Wishbone]

Noticed some superficial weirdness Topper must have uploaded the file while doing time travel to 2020. A request: can this addon be converted into a SAM?

 

[Topper]

Hi,

thanks for the feedback!

Not working for me. As soon as I want to load a rocket I get a CTD. Also with all modules turned off (except AAmissle). No matter which scenario I try

IronRain, witch build of orbiter are you using? (klick "about orbiter" in the launchpad)??

Noticed some superficial weirdness Topper must have uploaded the file while doing time travel to 2020. A request: can this addon be converted into a SAM?

Yes of course, it's possible to make a SAM from this add on, the sourcecode is included and if someone will do that then he can.

 

[Urwumpe]

Yes of course, it's possible to make a SAM from this add on, the sourcecode is included and if someone will do that then he can.

Wasn't the German contribution to the MEDS a AMRAAM converted into a truck launched VLS medium range SAM? :lol:

 

[IronRain]

Hi,

thanks for the feedback!

IronRain, witch build of orbiter are you using? (klick "about orbiter" in the launchpad)??

Last stable version; V100830

 

[Topper]

Last stable version; V100830

Do you have tryed it on a "clean" installation?
If not, could you try it?

 

[Topper]

Hi,

can you please try the new Version 0.97?
I hope there are no CTD's but we will see,
and now it's now problem to have the module "UMMUFA" activated ;-)

 

[Carmen A]

I will try that later... in multiplayer

---------- Post added at 20:52 ---------- Previous post was at 11:02 ----------

Not working for me. As soon as I want to load a rocket I get a CTD. Also with all modules turned off (except AAmissle). No matter which scenario I try

Same issue - I have installed the MSVCR70, and still no go with loading missiles.

It CTDs immediately.

I tested the missile MFD, looks good, but needs a range indicator - range scale display 10/20/40/80/160 like the real one would be nice, otherwise interceptions now are guesswork.

Also needs a "dogfight mode" for close range auto acquisition :3

 

[Spacethingy]

Latest version of your addon, Orbiter 2010P1, CTD on missile load.

All modules turned off (except yours), no time acceleration.

 

[Topper]

Uuuoho oh ok,it was a bit late yesterday and so i don't replaced the dll of the module in the release zip pack.
Please try again now with version 0.971 ;-)

And please, can someone who have had a CTD confirm me that it's working correct now?

 

[Wishbone]

Downloading now. The log complained in 0.97 about Left.dds, Right.dds and Body.dds. I hope it's been fixed as well.

EDIT: ouch. The size precludes me from d/loading it right away. Could you also reduce the size by excluding debug and non-essential files (*.pdb, *.ncb, *.suo at least)? TIA