Request Any SLS and Orion MPCV in development?

Wow thanks. I forgot about the Habitat. Really for the Habitat it could be put in a UCGO.

But you can't fit the housing part of the LER in the Lander

Couldn't find out how the rover would get up.
 
Last edited:
Inflatables man. inflatables.

inflate%201large-thumb-445x435.jpg
 
Doable. One issue is I think you could make the base as a UCGO. But once inflated. one couldn't just pack it back up.

Let me try to get a ALtair cargo version going.

---------- Post added at 08:26 AM ---------- Previous post was at 05:06 AM ----------

I saw this:
https://en.wikipedia.org/wiki/Altair_%28spacecraft%29#mediaviewer/File:Altair_-_cargo_mode.jpg

Then on top you could make it UCGO and add cargo to the upper deck?

Or put the ler like this config;
http://s3.photobucket.com/user/Kyle_75/media/altairler.jpg.html
 
I think I am going to try to make that cargo version. Not sure what specs to use though.
 
LER had two components, the mobile ATHLETE section and the Habitation Module. The ATHLETE section was designed to haul around any compatible cargo, not just the Habitation Module.
 
I guess I will have to make that. But this look different than the other LER's. Wow that vessel can do all sorts of things. Grabs/drills on the wheels.
 
Last edited:
Wonder Why no has made one. I think it might be an animation nightmare. How is it controlled?

---------- Post added at 05:28 PM ---------- Previous post was at 01:39 PM ----------

ok kinda off topic in Anim8or To make the Altair cargo. I made a hex 7.5 diameter. BUt to rotate it. it seems to be in units of .2 so I can rotate 22.5 either 22.4 or 22.6 anyone know how to change it
 
SKYLAB2SLS_zpsa0fdcad9.jpg



SKYLAB2SLS2_zpsfa094a32.jpg

But I am not sure what to do with that scaffold part. I have a mesh that is folded up. it has a key that the user presses and the mesh disappears and a scaffold vessel is created. The skylab2 can attach to it. I might throw a flexcraft on top of the dock.

For some reason I get a CTD when the Fairings get released. I have a cfg and mesh in the correct locations.

---------- Post added 11-05-14 at 05:16 PM ---------- Previous post was 11-04-14 at 09:19 PM ----------

Here is the scenario. I know the fairing cfg and mesh are good as I can use them in another scenario. I get a CTD with it is time for the fairings to come off:

Code: 
BEGIN_DESC
sls-130T version.  With orion and storage

END_DESC

BEGIN_ENVIRONMENT
  System Sol
  Date MJD 56823.8496412373
END_ENVIRONMENT

BEGIN_FOCUS
  Ship slstower
END_FOCUS

BEGIN_CAMERA
  TARGET slstower
  MODE Extern
  POS 2.90 -105.58 -34.52
  TRACKMODE TargetRelative
  FOV 50.00
END_CAMERA

BEGIN_HUD
  TYPE Surface
END_HUD

BEGIN_MFD Left
  TYPE Surface
  SPDMODE 1
END_MFD

BEGIN_SHIPS
sls-EUS:Velcro\EUS
  STATUS Landed Earth
  POS -80.6745292 28.5191812
  HEADING 0.00
  ATTACHED 2:0,slsCORE
  AFCMODE 7
  PRPLEVEL 0:1.000000
  NAVFREQ 0 0
  CONFIGURATION 0
  PRIMEBOOSTER 1
  CENTERTHRUST 0
  IGNITENEXT 0
  PADBIAS 1.000000
  CAMERA 0.000000 0.000000 75.000000
  TGT_HEADING 95.000000
  PAYATCH SKYLAB2 0 0 -13 0 0 -1 0 1 0
END
slsCORE:Velcro\SLS_Core
  STATUS Landed Earth
  POS -80.6745292 28.5191812
  HEADING 0.00
  ATTACHED 2:0,slstower
  AFCMODE 7
  PRPLEVEL 0:1.000000 1:1.000000 2:1.000000
  NAVFREQ 0 0
  CONFIGURATION 0
  PRIMEBOOSTER 1
  CENTERTHRUST 0
  PADBIAS 1.000000
  CAMERA 0.000000 0.000000 90.000000
  TGT_HEADING 95.000000
  SERIESBURN 0 sls-EUS 0 0 -67.25 0.0000 0.0000 -1.0000 0.0000 1.0000 0.0000
  FAIRING 2 0.50 0.00 0.00 1.00
  PAYLOAD Fair2 SKYLABFAIR1 SKYLABFAIR1 0 0 80 1020.0 0.0 1.0
  PAYLOAD Fair1 SKYLABFAIR2 SKYLABFAIR2 0 0 80 1020.0 0.0 1.0
  SLA 1 -1.50 -1.50 0.00
  PAYLOAD SLA1 slsinterstage slsinterstage 0.00 0.00 0.00 0.00 0.00 1.00
END
Booster1:Velcro\SLSBOOSTER2
  STATUS Orbiting Earth
  RPOS -3496806.00 1068323.04 5217375.45
  RVEL -318.660 100.050 -234.060
  AROT 11.57 33.29 -159.46
  AFCMODE 7
  NAVFREQ 0 0
  CONFIGURATION 0
  PRIMEBOOSTER 0
  CENTERTHRUST 1
  PADBIAS 1.00
  TGT_HEADING 95.00
  PARALLELBURN 1 slsCORE -6.5000 -2.5000 0.0000 0.0000 1.0000 0.0000 0.0000 0.0000 1.0000
END
Booster2:Velcro\SLSBOOSTER
  STATUS Orbiting Earth
  RPOS -3496816.18 1068326.17 5217367.99
  RVEL -318.660 100.050 -234.060
  AROT 11.57 33.29 -159.46
  AFCMODE 7
  NAVFREQ 0 0
  CONFIGURATION 0
  PRIMEBOOSTER 0
  CENTERTHRUST 1
  PADBIAS 1.00
  TGT_HEADING 95.00
  PARALLELBURN 1 slsCORE 6.5000 -2.5000 0.0000 0.0000 1.0000 0.0000 0.0000 0.0000 1.0000
END
slstower:SLSTOWER
  ARM_STATUS 0.9903 0.8461 0.8757 0.2895 0.5712 0.1901 0.2535 0.5045 0.0000 0.4720 0.1028 1.0000 0.5698
  ARM2_STATUS 0.0000 0.0000 0.4412 0.0000 0.1901 0.0000
  POST 1 
  STATUS Landed Earth
  POS -80.6038960 28.6087640
  HEADING 180.56
  AFCMODE 7
  NAVFREQ 0 0
  XPDR 0
END
SKYLAB2:SKYLABII
  STATUS Landed Earth
  POS -80.6745292 28.5191812
  HEADING 0.00
  AFCMODE 7
  PRPLEVEL 0:1.0
  NAVFREQ 0 0
  XPDR 466
  MODE 1
  SOLAR 0
  LAS 0
END
END_SHIPS

BEGIN_Attachment Manager
END
 
Last edited:
Great job with the Skylab II. I would say definitely include the ATHLETE. It would work for multiple cases (Moon, Mars, Phobos, Ect.) Anyway, with that BM-Lander, I have had problems with RCS and weight. It runs out of fuel extremely fast when carrying a station module down to the surface of Mars. If you used that lander, and put the ATHLETE on it, then it could be landed on the martian surface quite easily, that is if the propellant worked better . . .

---------- Post added at 01:56 PM ---------- Previous post was at 01:52 PM ----------
gattispilot said:
Like these:
https://dl.dropboxusercontent.com/u/71242599/altairler2.jpg
LER CHARIOT folded
https://dl.dropboxusercontent.com/u/71242599/altairler4.jpg

The LER wouldn't fit it the cargo area. the main nozzle hit it. So we tried attaching to the ramp
https://dl.dropboxusercontent.com/u/71242599/altairler6.jpg
Click to expand...

So, would it require assembly in space, or on the ground? It might be too hard to assemble LER2 on the surface because of the heavy white living module (it would have to be hoisted on top).
 
Thanks. Still haven't got the scenario to work to get the skylab up. I get one fairing and the interstage to separate when both fairing should come off.

Making the Athlete I would think it not be hard but coding it is another thing.

I guess it would move like the LER where all 6 wheels move together. But moving the attachment point might be hard. As the legs might be lower on one corner.
 
Might need to have a separate thread.

But it looks like each leg can be controlled separately. It that image it looks like the wheel are all turned so it would go in a circle.

So if for movement goes the 6 wheels rotate the same. But to be simple. The base could just lower evenly. How would the module get on top?
 
Wow, I forgot all about Athlete! It every bit as nimble as the LER, actually more so, it's freaking cool to watch.

It starts out on top of Altair, then spider walks off the lander and rolls over to where ever it needs to go. Somewhere on them internets there is a really cool time-lapse of it doing this (during one of the RATS competitions maybe?). I'll see if I can find it.

What I don't know is if it stays under the module permanently, if so, shouldn't the legs be mechanically locked in place somehow to prevent EVER shifting. Over my years of maintenance, I can guarantee you, that anything mechanical can fail (often at any time and usually when you need it most) So says Demon Murphy...

edit---

hehehe

And another one, not so campy. And it answered my question earlier.
 
Last edited:
OK. But I think just a 6 leg version would be good. I think tiring to control it might be a challenge.
 
You must log in or register to reply here.

Similar threads

barrygolden
Updates Artemis 4 and 5 SLS
Replies
5
Views
1K
gattispilot
gattispilot
francisdrake
OHM Orion-MPCV and Orange-SLS
Replies
4
Views
2K
francisdrake
francisdrake
E
Launching home made model rocket
Replies
4
Views
8K
xionx
xionx
Andy632
Problem China Manned Space Program - Orbiter 2010
Replies
4
Views
2K
Andy632
Andy632
D
Request Update Earth night light texture to latest NASA Black Marble version
2 3 4
Replies
64
Views
12K
lccrane
lccrane
Back
Top