Scenario Can Anyone tell me what is wrong with this scenario?

GalileoX

GalileoX

New member
Joined
Nov 4, 2008
Messages
26
Reaction score
1
Points
0
Location
Louisville
I swear I'm about to give up on SSBB. Every time I get a few space station modules together I get a CTD. Not while the scenario is originally running but when I try to relaunch the current state. Thanks

Code: 
BEGIN_DESC
Contains the latest simulation state.
END_DESC

BEGIN_ENVIRONMENT
  System Sol
  Date MJD 55917.4330219995
END_ENVIRONMENT

BEGIN_FOCUS
  Ship Mars Station Node 1
END_FOCUS

BEGIN_CAMERA
  TARGET BM230
  MODE Extern
  POS 21.64 53.72 -21.43
  TRACKMODE GlobalFrame
  FOV 50.00
END_CAMERA

BEGIN_HUD
  TYPE Orbit
  REF AUTO
END_HUD

BEGIN_MFD Left
  TYPE Map
  REF Mars
  POS 0.00 0.00
  DISP 1711
END_MFD

BEGIN_MFD Right
  TYPE Orbit
  PROJ Ship
  FRAME Ecliptic
  ALT
  REF Mars
END_MFD

BEGIN_SHIPS
BSPJ01:Spacecraft\spacecraft3
  STATUS Landed Earth
  POS -80.7084905 28.6249350
  HEADING 150.00
  AFCMODE 7
  PRPLEVEL 0:1.000000
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
  SEQ 4 -2 0.000000
  SEQ 5 2 0.999825
  SEQ 6 2 0.999925
END
BSP4:Spacecraft\spacecraft3
  STATUS Landed Earth
  POS -80.7084905 28.6249350
  HEADING 150.00
  ATTACHED 0:0,BSPJ01
  AFCMODE 7
  PRPLEVEL 0:1.000000
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
  SEQ 4 -2 0.000000
  SEQ 5 -2 0.000000
  SEQ 6 -2 0.000000
  SEQ 7 -2 0.000000
  SEQ 8 -2 0.000000
  SEQ 9 -2 0.500000
  SEQ 10 -2 0.000000
  SEQ 11 -2 0.500000
  SEQ 12 -2 0.500000
  SEQ 13 -2 0.500000
  SEQ 14 -2 0.500000
  SEQ 15 -2 0.500000
END
Mars Station Node 1:BN301
  STATUS Orbiting Mars
  RPOS 3247911.14 597354.87 -2056124.52
  RVEL 1736.469 251.344 2816.222
  AROT 6.41 -36.46 -12.03
  AFCMODE 7
  DOCKINFO 0:0,Bm001-4 1:0,Bm001-1 3:0,BM001-5 4:0,Bm001-2 5:0,Bm001-3
  NAVFREQ 0 0
END
Bm001-1:BM001
  STATUS Orbiting Mars
  RPOS 3247907.54 597354.22 -2056121.77
  RVEL 1736.469 251.344 2816.222
  AROT 166.69 -51.87 -74.25
  AFCMODE 7
  DOCKINFO 0:1,Mars Station Node 1 1:0,BM210-1
  NAVFREQ 0 0
END
Bm001-2:BM001
  STATUS Orbiting Mars
  RPOS 3247913.86 597355.28 -2056120.86
  RVEL 1736.469 251.344 2816.222
  AROT -173.59 36.46 12.03
  AFCMODE 7
  DOCKINFO 0:4,Mars Station Node 1 1:1,BM211-2
  NAVFREQ 0 0
END
Bm001-3:BM001
  STATUS Orbiting Mars
  RPOS 3247908.42 597354.46 -2056128.18
  RVEL 1736.469 251.344 2816.222
  AROT 6.41 -36.46 167.97
  AFCMODE 7
  DOCKINFO 0:5,Mars Station Node 1 1:0,BM211-3
  NAVFREQ 0 0
END
Bm001-4:BM001
  STATUS Orbiting Mars
  RPOS 3247914.74 597355.52 -2056127.27
  RVEL 1736.469 251.344 2816.222
  AROT -13.31 51.87 -105.75
  AFCMODE 7
  DOCKINFO 0:0,Mars Station Node 1 1:0,BM211-4
  NAVFREQ 0 0
END
BM001-5:BM001
  STATUS Orbiting Mars
  RPOS 3247911.91 597350.36 -2056124.58
  RVEL 1736.469 251.344 2816.222
  AROT 89.20 9.65 -127.07
  AFCMODE 7
  DOCKINFO 0:3,Mars Station Node 1 1:0,Node-2
  NAVFREQ 0 0
END
Node-2:BN301
  STATUS Orbiting Mars
  RPOS 3247912.68 597345.85 -2056124.65
  RVEL 1736.469 251.344 2816.222
  AROT 166.69 -51.87 105.75
  AFCMODE 7
  DOCKINFO 0:1,BM001-5 1:0,BM001-41 2:0,Node-2-1 3:0,BM215 4:0,BM214 5:0,BM212
  NAVFREQ 0 0
END
Node-2-1:BN301
  STATUS Orbiting Mars
  RPOS 3247915.29 597346.24 -2056121.13
  RVEL 1736.469 251.344 2816.222
  AROT -90.80 -9.65 127.07
  AFCMODE 7
  DOCKINFO 0:2,Node-2 1:0,BM002
  NAVFREQ 0 0
END
BM002:BM002
  STATUS Orbiting Mars
  RPOS 3247918.01 597346.65 -2056117.47
  RVEL 1736.469 251.344 2816.222
  AROT -173.59 36.46 -167.97
  AFCMODE 7
  DOCKINFO 0:1,Node-2-1
  NAVFREQ 0 0
END
BM210-1:BM211
  STATUS Orbiting Mars
  RPOS 3247901.68 597353.16 -2056117.29
  RVEL 1736.469 251.344 2816.222
  AROT 166.69 -51.87 105.75
  AFCMODE 7
  DOCKINFO 0:1,Bm001-1
  NAVFREQ 0 0
END
BM211-2:BM211
  STATUS Orbiting Mars
  RPOS 3247918.29 597355.95 -2056114.91
  RVEL 1736.469 251.344 2816.222
  AROT 6.41 -36.46 -12.03
  AFCMODE 7
  DOCKINFO 1:1,Bm001-2
  NAVFREQ 0 0
END
BM211-3:BM211
  STATUS Orbiting Mars
  RPOS 3247904.00 597353.79 -2056134.13
  RVEL 1736.469 251.344 2816.222
  AROT 6.41 -36.46 -12.03
  AFCMODE 7
  DOCKINFO 0:1,Bm001-3
  NAVFREQ 0 0
END
BM211-4:BM211
  STATUS Orbiting Mars
  RPOS 3247920.60 597356.58 -2056131.75
  RVEL 1736.469 251.344 2816.222
  AROT -13.31 51.87 74.25
  AFCMODE 7
  DOCKINFO 0:1,Bm001-4
  NAVFREQ 0 0
END
BM215:BM215
  STATUS Orbiting Mars
  RPOS 3247908.35 597345.19 -2056130.46
  RVEL 1736.469 251.344 2816.222
  AROT 6.41 -36.46 167.97
  AFCMODE 7
  DOCKINFO 0:3,Node-2
  NAVFREQ 0 0
END
BM214:BM214
  STATUS Orbiting Mars
  RPOS 3247918.40 597346.88 -2056129.02
  RVEL 1736.469 251.344 2816.222
  AROT -13.31 51.87 -105.75
  AFCMODE 7
  DOCKINFO 0:4,Node-2
  NAVFREQ 0 0
END
BM212:BM212
  STATUS Orbiting Mars
  RPOS 3247906.95 597344.81 -2056120.28
  RVEL 1736.469 251.344 2816.222
  AROT 166.69 -51.87 -74.25
  AFCMODE 7
  DOCKINFO 0:5,Node-2
  NAVFREQ 0 0
END
BM001-41:BM001
  STATUS Orbiting Mars
  RPOS 3247913.44 597341.34 -2056124.71
  RVEL 1736.469 251.344 2816.222
  AROT 89.20 9.65 -127.07
  AFCMODE 7
  DOCKINFO 0:1,Node-2 1:0,Node3
  NAVFREQ 0 0
END
Node3:BN301
  STATUS Orbiting Mars
  RPOS 3247914.21 597336.83 -2056124.77
  RVEL 1736.469 251.344 2816.222
  AROT 166.69 -51.87 105.75
  AFCMODE 7
  DOCKINFO 0:1,BM001-41 1:0,BM230
  NAVFREQ 0 0
END
BM230:BM230
  STATUS Orbiting Mars
  RPOS 3247915.43 597329.65 -2056124.87
  RVEL 1736.469 251.344 2816.222
  AROT 89.20 9.65 -127.07
  AFCMODE 7
  DOCKINFO 0:1,Node3
  NAVFREQ 0 0
END
END_SHIPS

BEGIN_ExtMFD
END

BEGIN_VistaBoost
END
 
Try the same scenario, but change the lines that have the name of this "Ship Mars Station Node 1" ship, into something without spaces. "ShipMarsStationNode1" or "Ship_Mars_Station_Node_1"

Hope this helps
:cheers:
 
My first suggestion would be to check the attachment points. I was building a space station, and always found that after a few stages, the thing would then start to CTD upon every loading of the current situation scenario. I finally figured out that while I had attached a URMS to a module, and it worked fine for that moment, but when saving, it wrote the attachment point wrong, every time, and that is what made it crash.
 
Thanks. I'll check the attachment points. I also noticed that when it CTD it disables windows Cleartype. Why would that be? is there a connection or is it a clue as to what's happening. I thought it might have something to do with Vistaboost.

---------- Post added at 10:09 PM ---------- Previous post was at 10:02 PM ----------

Thanks dgatsoulis! I changed them all to vessel names with no spaces and it started right up! :thumbup:
 
Vistaboost disables Cleartype and re-enables it when you exit the scenario. So, if you have a CTD it doesn't get the chance to re-enable Cleartype.
 
That is my second problem. ClearType appears to be disabled every time I shut down Orbiter. Not only when there is a CTD but every time, This is a new development. Any ideas?
 
GalileoX said:
ClearType appears to be disabled every time I shut down Orbiter. Not only when there is a CTD but every time, This is a new development. Any ideas?
Click to expand...
Does "new development" mean Orbiter beta 111105? If so, then don't use VistaBoost with it, as Orbiter itself disables ClearType by default. So either disable VistaBoost or turn off disabling of ClearType on the "Extra" tab.
 
You must log in or register to reply here.

Similar threads

gattispilot
C++ Question Help debugging
2
Replies
31
Views
7K
Buck Rogers
Buck Rogers
B
Titan surface launch anomaly
Replies
4
Views
3K
BrianJ
B
Hotdog
Scenario Scenario editing - STS payload orientation
Replies
1
Views
2K
gattispilot
gattispilot
Thunder Chicken
Problem Animation state and status correctly written to scenario file, but can't be read?
Replies
3
Views
2K
diogom
D
Thunder Chicken
Discussion Setting Touchdown Points for Vessels on Solid Planet Surfaces I: The Mass Spring Damper Model
2
Replies
37
Views
13K
Thunder Chicken
Thunder Chicken
Back
Top