Problem D3D9 HUD Sketchpad Issue

tl8

tl8

Addon Developer
Addon Developer
Tutorial Publisher
Joined
Oct 16, 2007
Messages
3,644
Reaction score
25
Points
88
Location
Gold Coast QLD
I am having an issue with the HUD on my Aircraft Tug.

It works well in the default in-line client, however when I move to the D3D9 client, the pens don't work correctly. I am not sure what the exact issue is though.

Any help would be appreciated.

D3D9:


In-Line:


Code:
Code: 
bool JBT_B1200::clbkDrawHUD  ( int  mode, const HUDPAINTSPEC *  hps, oapi::Sketchpad *  skp)
{
    
    //VESSEL3::clbkDrawHUD (mode, hps, skp);
    
    //oapiSetHUDMode(HUD_NONE);
    //oapiOpenMFD(MFD_NONE,MFD_LEFT);
    //oapiOpenMFD(MFD_NONE,MFD_RIGHT);

    


    skp->SetOrigin(0,0);

    oapi::Pen* pOrgPen;

    int rightThirdCentreX = hps->W/6*5;
    int rightThirdCentreY = hps->H/2;

    
    oapi::Font* speedoFont = oapiCreateFont(30,true,"Sans",(FontStyle)(oapi::Font::BOLD));
    oapi::Font*    infoFont = oapiCreateFont(20,true,"Sans",(FontStyle)(oapi::Font::BOLD));
    oapi::Font* indicatorFont =oapiCreateFont(50,true,"Sans",(FontStyle)(oapi::Font::BOLD));

    //Problem below here?
    oapi::Pen* needleRedPen = oapiCreatePen(1,4,0x0000CC);
    //oapi::Pen* infoPen = oapiCreatePen(1,8,0x00CCCC);
    
    
    oapi::Pen* infoPen[4];

    /*
    infoPen[0]= oapiCreatePen(1,4,0x0000CC);
    infoPen[1]= oapiCreatePen(1,4,0x0000CC);
    infoPen[2]= oapiCreatePen(1,4,0x0000CC);
    infoPen[3]= oapiCreatePen(1,4,0x0000CC);
    */
    infoPen[0]= oapiCreatePen(1,4,B1200_HUDCOLOURS[0]);
    infoPen[1]= oapiCreatePen(1,4,B1200_HUDCOLOURS[1]);
    infoPen[2]= oapiCreatePen(1,4,B1200_HUDCOLOURS[2]);
    infoPen[3]= oapiCreatePen(1,4,B1200_HUDCOLOURS[3]);

    //Draw our 4 Letter inicators Lights, Strobe, Park, Gear
    int letterX = rightThirdCentreX + 100;
    int letterX1 = letterX + 50;
    
    
    

    
    int RX1 = letterX - 25;
    int RX2 = letterX1 + 10;
    int RX = (RX1+RX2)/2;
    int RDist = (RX2-RX1)/3*2;

    //oapi::Pen* rectPen = oapiCreatePen(1,RDist,0x666666);

    int RY1 = rightThirdCentreY - 150;
    int RY2 = rightThirdCentreY + 50;
    
    //--------------------------------------------
    //Indicator Lights
    //--------------------------------------------
    {
    
    skp->SetFont(indicatorFont);
        
    //pOrgPen = skp->SetPen(rectPen);
    //skp->Line(RX,RY1,RX,RY2);

    int letterY = rightThirdCentreY - 150;
    int letterY1 = letterY + 50;

    if(indicators[0]) {
        //Headlight
        skp->SetBackgroundMode(skp->BK_OPAQUE);
        skp->SetBackgroundColor(0xFF0000);
        skp->SetTextColor(0xFFFFFF);
        skp->TextBox(letterX,letterY,letterX1,letterY1,"H",1);
        }//if Headlights
    else {
        skp->SetBackgroundMode(skp->BK_OPAQUE);
        skp->SetBackgroundColor(0x000000);
        skp->SetTextColor(0xFF0000);
        skp->TextBox(letterX,letterY,letterX1,letterY1,"H",1);
    }//else Headlights

    letterY = rightThirdCentreY - 100;
    letterY1 = letterY + 50;

    if(indicators[1]) {
        //Warning / Flash
        skp->SetBackgroundMode(skp->BK_OPAQUE);
        skp->SetBackgroundColor(0x0066FF);
        skp->SetTextColor(0xFFFFFF);
        skp->TextBox(letterX,letterY,letterX1,letterY1,"F",1);
        }//if Warning / Flash
    else {
        skp->SetBackgroundMode(skp->BK_OPAQUE);
        skp->SetBackgroundColor(0x000000);
        skp->SetTextColor(0x0066FF);
        skp->TextBox(letterX,letterY,letterX1,letterY1,"F",1);
    }//else Warning / Flash

    letterY = rightThirdCentreY - 50;
    letterY1 = letterY + 50;

    if(indicators[2]) {
        //Park Brake
        skp->SetBackgroundMode(skp->BK_OPAQUE);
        skp->SetBackgroundColor(0x0000FF);
        skp->SetTextColor(0xFFFFFF);
        skp->TextBox(letterX,letterY,letterX1,letterY1,"P",1);
        }//if Park Brake
    else {
        skp->SetBackgroundMode(skp->BK_OPAQUE);
        skp->SetBackgroundColor(0x000000);
        skp->SetTextColor(0x0000FF);
        skp->TextBox(letterX,letterY,letterX1,letterY1,"P",1);
    }//else Park Brake

    letterY = rightThirdCentreY + 0;
    letterY1 = letterY + 50;

    skp->SetBackgroundMode(skp->BK_TRANSPARENT);
    //skp->SetBackgroundColor(0x000000);
    skp->SetTextColor(0x00FF00);
    switch (transmission) {
        case 2: skp->TextBox(letterX,letterY,letterX1,letterY1,"L",1);
                break;
        case 1: skp->TextBox(letterX,letterY,letterX1,letterY1,"D",1);
                break;
        case 0: skp->TextBox(letterX,letterY,letterX1,letterY1,"N",1);
                break;
        case -1: skp->TextBox(letterX,letterY,letterX1,letterY1,"R",1);
                break;
    }//switch
    
    }//Indicator
    
    

    //--------------------------------------------
    //Speedo
    //--------------------------------------------
    {
    //Set the pen to draw the arc
    
    pOrgPen =    skp->SetPen(infoPen[HudColour]);
    //Set centre
    int dialX = rightThirdCentreX, dialY = rightThirdCentreY;
    
    //Set intial conditions
    double radius, angle1, angle2;
    radius = 200;
    angle1 = 195 * RAD;
    angle2 = 75 * RAD;
    int x1 = 0,y1 = 0,x2 = 0,y2 = 0;
    
    //Run through the arc and draw it
    for(double i = angle1; i > angle2; i -= 0.01){
        x1 = (int)(-sin(i)*radius + 0.5 + dialX);
        y1 = (int)(cos(i)*radius + 0.5 + dialY);
        skp->Line(x1,y1,x1,y1);
    }//for
    
    //Interval Markings
    //Here No. is 6 with 5 spaces
    double interval = (angle1 - angle2)/5;
    double angle;
    
    //For the Text display
    int x3,y3;
    char* speedo[6] = {"25","20","15","10","5","0"};
    skp->SetTextAlign(skp->CENTER,skp->TOP);
    
    //Set font for Text
    skp->SetFont(speedoFont);
    skp->SetTextColor(B1200_HUDCOLOURS[HudColour]);

    //Draw text and markers at correct spots
    for(int i = 0; i <= 5; i++){
        angle = angle1 - interval*i;
        x1 = (int)(-sin(angle)*radius + 0.5 + dialX);
        y1 = (int)(cos(angle)*radius + 0.5 + dialY);
        x2 = (int)(-sin(angle)*radius*0.9 + 0.5 + dialX);
        y2 = (int)(cos(angle)*radius*0.9 + 0.5 + dialY);
        x3 = (int)(-sin(angle)*radius*0.8 + 0.5 + dialX);
        y3 = (int)(cos(angle)*radius*0.8 + 0.5 + dialY);
        skp->Text(x3,y3,speedo[i],2);
        skp->Line(x1,y1,x2,y2);
    }//for
    
    //Draw Title
    x3 = (int)(-sin(PI/4*3)*radius*0.4 + 0.5 + dialX);
    y3 = (int)(cos(PI/4*3)*radius*0.4 + 0.5 + dialY);
    skp->Text(x3,y3,"Km/h",4);
    skp->SetTextAlign(skp->LEFT,skp->TOP);

    //Set pen for Needle
    skp->SetPen(needleRedPen);
    
    //Calculate deflection of needle
    double speedRatio = 0;
    //if (currentSpeed > 0)
        speedRatio = (fabs(currentSpeed)/B1200_MAXSPEED);

    angle = (angle1 - angle2)*speedRatio + angle2;
    
    //Draw needle
    x1 = (int)(-sin(angle)*radius*0.95 + 0.5 + dialX);
    y1 = (int)(cos(angle)*radius*0.95 + 0.5 + dialY);
    skp->Line(x1,y1,dialX,dialY);

    }//Speedo

    //--------------------------------------------
    //Rev Counter
    //--------------------------------------------
    {
    //Set the pen to draw the arc

    skp->SetPen(infoPen[HudColour]);
    
    //Set centre
    int dialX = rightThirdCentreX - 160, dialY = rightThirdCentreY + 200;
    
    //Set intial conditions
    double radius, angle1, angle2;
    radius = 100;
    angle1 = 135 * RAD;
    angle2 = 240 * RAD;
    int x1 = 0,y1 = 0,x2 = 0,y2 = 0;
    
    //Interval Markings
    //Here No. is 6 with 5 spaces
    double interval = (angle1 - angle2)/5;
    double angle;
    
    //For the Text display
    int x3,y3;
    char* rev[6] = {"0","5","10","15","20","25"};
    skp->SetTextAlign(skp->CENTER,skp->TOP);
    
    //Set font for Text
    skp->SetFont(infoFont);
    skp->SetTextColor(B1200_HUDCOLOURS[HudColour]);

    //Draw text and markers at correct spots
    for(int i = 0; i <= 5; i++){
        angle = angle1 - interval*i;
        x1 = (int)(-sin(angle)*radius + 0.5 + dialX);
        y1 = (int)(cos(angle)*radius + 0.5 + dialY);
        x2 = (int)(-sin(angle)*radius*0.9 + 0.5 + dialX);
        y2 = (int)(cos(angle)*radius*0.9 + 0.5 + dialY);
        x3 = (int)(-sin(angle)*radius*0.8 + 0.5 + dialX);
        y3 = (int)(cos(angle)*radius*0.8 + 0.5 + dialY);
        skp->Text(x3,y3,rev[i],2);
        skp->Line(x1,y1,x2,y2);
    }//for
    
    //Draw Title
    x3 = (int)(-sin(PI)*radius*0.4 + 0.5 + dialX);
    y3 = (int)(cos(PI)*radius*0.4 + 0.5 + dialY);
    skp->Text(x3,y3,"x100 RPM",8);
    skp->SetTextAlign(skp->LEFT,skp->TOP);

    //Set pen for Needle
    skp->SetPen(needleRedPen);
    
    //Calculate deflection of needle
    angle = (angle2 - angle1)*(engineRPM/2500) + angle1;
    
    //Draw needle
    x1 = (int)(-sin(angle)*radius*0.95 + 0.5 + dialX);
    y1 = (int)(cos(angle)*radius*0.95 + 0.5 + dialY);
    skp->Line(x1,y1,dialX,dialY);

    }

    //--------------------------------------------
    //Steering Indicator
    //--------------------------------------------
    {
    //Set the pen to draw the arc
    skp->SetPen(infoPen[HudColour]);
    
    //Set centre
    int dialX = rightThirdCentreX, dialY = rightThirdCentreY + 200;
    
    //Set intial conditions
    double radius, angle1, angle2;
    radius = 100;
    angle1 = 135 * RAD;
    angle2 = 225 * RAD;
    int x1 = 0,y1 = 0,x2 = 0,y2 = 0;
    
    //Interval Markings
    //Here No. is 5 with 4 spaces
    double interval = (angle1 - angle2)/4;
    double angle;
    
    //For the Text display
    int x3,y3;
    char* rev[5] = {"20","10","0","10","20"};
    skp->SetTextAlign(skp->CENTER,skp->TOP);
    
    //Set font for Text
    skp->SetFont(infoFont);
    skp->SetTextColor(B1200_HUDCOLOURS[HudColour]);

    //Draw text and markers at correct spots
    for(int i = 0; i <= 4; i++){
        angle = angle1 - interval*i;
        x1 = (int)(-sin(angle)*radius + 0.5 + dialX);
        y1 = (int)(cos(angle)*radius + 0.5 + dialY);
        x2 = (int)(-sin(angle)*radius*0.9 + 0.5 + dialX);
        y2 = (int)(cos(angle)*radius*0.9 + 0.5 + dialY);
        x3 = (int)(-sin(angle)*radius*0.8 + 0.5 + dialX);
        y3 = (int)(cos(angle)*radius*0.8 + 0.5 + dialY);
        skp->Text(x3,y3,rev[i],2);
        skp->Line(x1,y1,x2,y2);
    }//for
    
    //Draw Title
    x3 = (int)(-sin(PI)*radius*0.4 + 0.5 + dialX);
    y3 = (int)(cos(PI)*radius*0.4 + 0.5 + dialY);
    skp->Text(x3,y3,"Degrees",7);
    skp->SetTextAlign(skp->LEFT,skp->TOP);

    //Set pen for Needle
    skp->SetPen(needleRedPen);
    
    //Calculate deflection of needle
    angle = -(angle1 - angle2)*GetControlSurfaceLevel(AIRCTRL_RUDDER)/2 + PI;
    
    //Draw needle
    x1 = (int)(-sin(angle)*radius*0.95 + 0.5 + dialX);
    y1 = (int)(cos(angle)*radius*0.95 + 0.5 + dialY);
    skp->Line(x1,y1,dialX,dialY);


    }
    //--------------------------------------------
    //Fuel Level
    //--------------------------------------------
    {
    //Set the pen to draw the arc
    skp->SetPen(infoPen[HudColour]);
    //skp->SetPen(infoPen);
    //Set centre
    int dialX = rightThirdCentreX + 160, dialY = rightThirdCentreY + 200;
    
    //Set intial conditions
    double radius, angle1, angle2;
    radius = 100;
    angle1 = 135 * RAD;
    angle2 = 225 * RAD;
    int x1 = 0,y1 = 0,x2 = 0,y2 = 0;
    
    //Interval Markings
    //Here No. is 5 with 4 spaces
    double interval = (angle1 - angle2)/4;
    double angle;
    
    //For the Text display
    int x3,y3;
    char* rev[5] = {"E"," "," "," ","F"};
    skp->SetTextAlign(skp->CENTER,skp->TOP);
    
    //Set font for Text
    skp->SetFont(infoFont);
    skp->SetTextColor(B1200_HUDCOLOURS[HudColour]);

    //Draw text and markers at correct spots
    for(int i = 0; i <= 4; i++){
        angle = angle1 - interval*i;
        x1 = (int)(-sin(angle)*radius + 0.5 + dialX);
        y1 = (int)(cos(angle)*radius + 0.5 + dialY);
        x2 = (int)(-sin(angle)*radius*0.9 + 0.5 + dialX);
        y2 = (int)(cos(angle)*radius*0.9 + 0.5 + dialY);
        x3 = (int)(-sin(angle)*radius*0.8 + 0.5 + dialX);
        y3 = (int)(cos(angle)*radius*0.8 + 0.5 + dialY);
        skp->Text(x3,y3,rev[i],2);
        skp->Line(x1,y1,x2,y2);
    }//for
    
    //Draw Title
    x3 = (int)(-sin(PI)*radius*0.4 + 0.5 + dialX);
    y3 = (int)(cos(PI)*radius*0.4 + 0.5 + dialY);
    skp->Text(x3,y3,"Fuel",4);
    skp->SetTextAlign(skp->LEFT,skp->TOP);

    //Set pen for Needle
    skp->SetPen(needleRedPen);
    
    //Calculate deflection of needle
    angle = (angle2 - angle1)*fuel/B1200_FUELMASS + angle1;
    
    //Draw needle
    x1 = (int)(-sin(angle)*radius*0.95 + 0.5 + dialX);
    y1 = (int)(cos(angle)*radius*0.95 + 0.5 + dialY);
    skp->Line(x1,y1,dialX,dialY);

    }

    //--------------------------------------------
    //Attachment Text
    //--------------------------------------------
    {
    int leftThirdCentreX = hps->W/6;
    int leftThirdCentreY = hps->H/2 - 60;
    int lineoffset = 30;

    skp->SetFont(infoFont);
    skp->SetTextAlign(skp->LEFT,skp->TOP);
    
    int x = leftThirdCentreX, y = leftThirdCentreY;
    skp->Text(x,y,"Vessel Attached:",16);
    
    y = leftThirdCentreY + 2 * lineoffset;
    skp->Text(x,y,"Towbar Attached to:",16);
    
    char vesselName[32];

    switch (JBT_B1200::mode) {
        case -2 :    y = leftThirdCentreY + lineoffset;
                    
                    oapiGetObjectName(GetAttachmentStatus(back),vesselName,32); 
                    skp->Text(x,y,vesselName,32);
                    y = leftThirdCentreY + 3*lineoffset;
                    skp->Text(x,y,"Rear",4);
                    break;

        case -1 :    y = leftThirdCentreY + lineoffset;
                    skp->Text(x,y,"None",4);
                    y = leftThirdCentreY + 3*lineoffset;
                    skp->Text(x,y,"Rear",4);
                    break;

        case 0 :    y = leftThirdCentreY + lineoffset;
                    skp->Text(x,y,"None",4);
                    y = leftThirdCentreY + 3*lineoffset;
                    skp->Text(x,y,"None",4);
                    break;

        case 1 :    y = leftThirdCentreY + lineoffset;
                    skp->Text(x,y,"None",4);
                    y = leftThirdCentreY + 3*lineoffset;
                    skp->Text(x,y,"Front",5);
                    break;

        case 2 :    y = leftThirdCentreY + lineoffset;
                    oapiGetObjectName(GetAttachmentStatus(front),vesselName,32); 
                    skp->Text(x,y,vesselName,32);
                    y = leftThirdCentreY + 3*lineoffset;
                    skp->Text(x,y,"Front",5);
                    break;
        }//switch

    }//AttachmentInfo
    
    // UMmu display messages
    if(dHudMessageDelay>0)
    {
        skp->Text(5,hps->H/60*15,cUmmuHudDisplay,strlen(cUmmuHudDisplay));
        dHudMessageDelay-=oapiGetSimStep();
        if(dHudMessageDelay<0)
            dHudMessageDelay=0;
    }

    skp->SetPen(pOrgPen);

    //Cleanup
    oapiReleaseFont(infoFont);
    oapiReleaseFont(speedoFont);
    oapiReleaseFont(indicatorFont);//Remove our previously created font

    oapiReleasePen(needleRedPen);
    //oapiReleasePen(rectPen);//Remove our Pen
    
    //oapiReleasePen(infoPen);
    oapiReleasePen(infoPen[0]);
    oapiReleasePen(infoPen[1]);
    oapiReleasePen(infoPen[2]);
    oapiReleasePen(infoPen[3]);
    

    
    

    return true;
}

D3D9.cfg
Code: 
FrameRate = 200
EnableLimiter = 0
PlanetPreloadMode = 0
PlanetTexLoadFreq = 20
Anisotrophy = 8
SceneAntialias = 4
SketchpadMode = 1
SketchpadFont = 0
PreLoadBaseVisuals = 0
EnableNormalMapping = 1
NearClipPlaneMode = 0
RwyLightAnimate = 1
RwyLightAngle = 120
RwyBrightness = 1.8
NightLightsAngle = 10
BumpMapAmplitude = 1
PlanetGlow = 1.1
EnvMapSize = 512
EnvMapMode = 1
EnvMapFaces = 1
ShadowMapMode = 1
ShadowMapSize = 1024
EnableGlass = 1
EnableMeshDbg = 1
StereoSeparation = 65
StereoConvergence = 0.2
Shaders = Default
DebugLvl = 1
VCNearPlane = 0.1
LightSourcesInUse = 12
MemAllocLogic = 0
DisableDrvMgm = 0
NVPerfHUD = 0
RejectRTDC = 0
DebugLineFontSize = 18
GDIRTSDebug = 0
LoadTexturesInSystemMem = 0
ManagedTiles = 0
DisableVisualHelperReadout = 0
SolCfg = Sol
DebugLineFont = Fixed
 
The D3D9Client doesn't support pen width option, therefore, only a hair lines are drawn. I don't know about the missing arcs and letters. It might work if you set Sketchpad device to "GDI only" and you enable "GDI compatibility mode". But it won't help much.

Code: 
//Run through the arc and draw it
    for(double i = angle1; i > angle2; i -= 0.01){
        x1 = (int)(-sin(i)*radius + 0.5 + dialX);
        y1 = (int)(cos(i)*radius + 0.5 + dialY);
        skp->Line(x1,y1,x1,y1);
    }//for

This ain't drawing anything. Shouldn't it be something like skp->Line(x1,y1,x2,y2). But still need to initialize x2, y2 properly.
 
BTW pen widths work for me on the XR HUD using D3D9 R12, at least. Code is:

Code: 
oapi::Pen *pNewPen = oapiCreatePen(1, Get2DHUDGearIndicatorPenWidth(), hudColor);
oapi::Pen *pOrgPen = skp->SetPen(pNewPen);

// render the gear indicators
skp->Rectangle (cx-(d/2), cy-(d*5), cx+(d/2), cy-(d*4));
skp->Rectangle (cx-(d*3), cy-(d*2), cx-(d*2), cy-d);
skp->Rectangle (cx+(d*2), cy-(d*2), cx+(d*3), cy-d);
...
// free the new pen
oapiReleasePen(pNewPen);

// restore the previous pen
skp->SetPen(pOrgPen);

...where Get2DHUDGearIndicatorPenWidth() returns either 3 (for 1280-pixel-wide panels) or 4 (for larger panel sizes). I tested it by hotwiring pen width to 8 as well.
 
dbeachy1 said:
BTW pen widths work for me on the XR HUD using D3D9 R12, at least. Code is:
Click to expand...

Rectangle() is the only exception where it works.
 
Thanks jarmonik for your feedback.

Now I know where I stand.

FWIIW, that for loop outputs the speedo arc. It worked in the in-line client and that was when it was first developed.

I am going to develop a VC to solve the problem.

I'll make a stop gap solution until that is done.
 
Just do
Line(x1,y1,x1+1,y1+1);
 
You must log in or register to reply here.

Similar threads

T
Project Topographic map MFD mode (Experimental for Orbiter 2015 Beta only)
Replies
11
Views
8K
Ripley
Ripley
tl8
Bug D3D9 VC Texture Issue
Replies
1
Views
2K
Urwumpe
Urwumpe
dgatsoulis
A fun ride in math-land
Replies
6
Views
13K
dgatsoulis
dgatsoulis
Enjo
Question Sketchpad Pen for Orbiter 2009 RC1
Replies
4
Views
3K
Hielor
H
N_Molson
Problem Unable to compile Atlantis sample (VC++2008)
2
Replies
20
Views
12K
orb
orb
Back
Top