New Release Delta 4 Heavy Lifter UPDATED

[virii2k]

Located at Orbithanger.com
You can launch custom payloads with it.
Works with orbiter 2010

Updated...
Base updated and in the correct area now.
Updated exhaust textures.
Thrust Specs now correct ( each cbc 3,312 KN (vac) - 2nd stage 110.1 KN ).
Updated second stage mesh.
Main cbc throttles back to 60% at 56 secs.
Boosters throttle back to 60% at 239 secs.
Added seperation motors to interstage for second stage seperation.

[ame="http://www.orbithangar.com/searchid.php?ID=4793"]Delta 4 Heavy Lifter[/ame]http://www.megaupload.com/?d=52N7JOBR

 

[DaveS]

OK, first test report:

• SLC-37B is not located at the coordinates of the real SLC-37B. In the scenario, the SLC-37B is located several km southeast of the real SLC-37B.
• Performance figures is not right. Over 2 million N of thrust for a tiny RL-10? Don't think so. The real thrust of the RL-10 used on the Delta upper stages is 109890 N according to the Delta IV Payload Planner's Guide.
• No auto-throttling of the RS-68's, especially of the center CBC during first stage ascent with the strap-ons. Also, no pre-MECO throttling on the strap-ons prior to sep. Same thing with the center CBC.

 

[Star Voyager]

And SLC-37B is not a rectangle:

However, I think the performance figures were changed to carry the DeltaGlider. I'll say one thing, though. It looks good :thumbup:!

 

[virii2k]

Thanks, I am making some adjustments and going to re upload

 

[DaveS]

Another thing I noticed is that the swing arms doesn't retract at lift-off as they should.