[PARTICLESTREAM_1]
NAME=DGContrail
SRCSIZE=8.0
SRCRATE=3
V0=150.0
SRCSPREAD=0.3
LIFETIME=3.5
GROWTHRATE=4
ATMSLOWDOWN=3.0
LTYPE=DIFFUSE
LEVELMAP=LVL_PSQRT
LMIN=0
LMAX=2
ATMSMAP=ATM_PLOG
AMIN=1e-4
AMAX=1
[PARTICLESTREAM_2]
NAME=DGMain
SRCSIZE=2.0
SRCRATE=10
V0=150.0
SRCSPREAD=0.1
LIFETIME=0.2
GROWTHRATE=16
ATMSLOWDOWN=1.0
LTYPE=EMISSIVE
LEVELMAP=LVL_SQRT
LMIN=0
LMAX=1
ATMSMAP=ATM_PLOG
AMIN=1e-5
AMAX=0.1
[PARTICLESTREAM_3]
NAME=DGHover
SRCSIZE=1.5
SRCRATE=2
V0=150.0
SRCSPREAD=0.3
LIFETIME=0.5
GROWTHRATE=2
ATMSLOWDOWN=3.0
LTYPE=DIFFUSE
LEVELMAP=LVL_PSQRT
LMIN=0
LMAX=2
ATMSMAP=ATM_PLOG
AMIN=1e-4
AMAX=1
[CONFIG]
MESHNAME="dship"
SIZE=30
FOCUS=1
VISIBLE=0
CAMERA=(-0.8,.9,8.5)
EMPTY_MASS=18500
FUEL_MASS=70000
MAIN_THRUST=1200000
RETRO_THRUST=600000
ATTITUDE_THRUST=50000
HOVER_THRUST=1000000
ISP=137500
TRIM=0.05
PMI=(15.5,22.1,7.7)
CW_Z_POS=0.09
CW_Z_NEG=0.09
CW_X=2.
CW_Y=1.4
CROSS_SECTION=(30,100,15)
COG=3.75
PITCH_MOMENT_SCALE=0.00005
BANK_MOMENT_SCALE=0.00005
ROT_DRAG=(0.10,0.13,0.04)
WING_ASPECT=0.7
WING_EFFECTIVENESS=2.5
;ATT_TEX=Exhaust_atrcs
MAIN_PSTREAM1=DGContrail
MAIN_PSTREAM2=DGMain
HOVER_PSTREAM1=DGContrail
HOVER_PSTREAM2=DGHover
ATT_PSTREAM1=LLRVex
LAND_PT1=(0,-3.75,7.8)
LAND_PT2=(-4.98,-3.75,2.8)
LAND_PT3=(4.98,-3.75,2.8)
[AERODYNAMICS]
; lift/drag attack point of the vertical airfoil
VAIRFOIL_ATTACK=(0,0,-0.2)
; wing chord length of the vertical airfoil
VAIRFOIL_CHORD=3
; wing area of the vertical airfoil
VAIRFOIL_AREA=75
; wing aspect ratio of the vertical airfoil
VAIRFOIL_ASPECT=1.5
; lift/drag attack point of the horizontal airfoil
HAIRFOIL_ATTACK=(0,0,-2)
; wing chord length of the horizontal airfoil
HAIRFOIL_CHORD=3
; wing area of the horizontal airfoil
HAIRFOIL_AREA=7
; wing aspect ratio of the horizontal airfoil
HAIRFOIL_ASPECT=1.5
; surface area of aileron
AILERON_AREA=0.2
; lift change of aileron
AILERON_LIFT=1.5
; lift/drag attack point of left aileron (right aileron deduced by x -> -x
AILERON_ATTACK=(5,0,-5)
; reference to animation sequence for the left aileron
AILERON_RIGHT_ANIM=0
; reference to animation sequence for the right aileron
AILERON_LEFT_ANIM=1
; surface area of elevator
ELEVATOR_AREA=0.9
; lift change of elevator
ELEVATOR_LIFT=2.0
; lift/drag attack point of elevator
ELEVATOR_ATTACK=(0,0,-5)
; reference to animation sequence of elevator
ELEVATOR_ANIM=2
; surface area of rudder
RUDDER_AREA=0.7
; lift change of rudder
RUDDER_LIFT=1.5
; lift/drag attack point of rudder
RUDDER_ATTACK=(0,0,-5)
; reference to animation sequence of rudder
RUDDER_ANIM=3
; speed brake maximum drag change
SPEEDBRAKE_DRAG=4
; speed brake drag attack point
SPEEDBRAKE_ATTACK=(0,0,-5);
; reference to animation sequence of speed brake
SPEEDBRAKE_ANIM=4
[LANDING_GEAR]
WHEEL=0.0001
BELLY=0.5
BRAKE=160000
SEQ=6
[DOCK_0]
POS=(0,-0.275,11.5)
DIR=(0,0,1)
ROT=(0,1,0)
[VC]
MESHNAME="dshipvc"
MFD_LEFT=15
MFD_RIGHT=16
HUD=17
HUD_SIZE=0.2
HUD_CENTER=(-0.82,0.97,9.4)
;===== ANIMATIONS =========
[ANIM_SEQ_0]
; left aileron
INIT_POS=0.5
DURATION=1
[ANIM_SEQ_1]
; right aileron
INIT_POS=0.5
DURATION=1
[ANIM_SEQ_2]
; elevator
INIT_POS=0.5
DURATION=1
[ANIM_SEQ_3]
; rudder
INIT_POS=0.5
[ANIM_SEQ_4]
; ramp
KEY=K
DURATION=4
INIT_POS=0
[ANIM_SEQ_5]
; Docking Cone
KEY=0
DURATION=8
[ANIM_SEQ_6]
; Gear
KEY=G
DURATION=6
[ANIM_SEQ_7]
; outer airlock
KEY=1
DURATION=8
[ANIM_SEQ_8]
; inner airlock
KEY=2
DURATION=8
[ANIM_SEQ_9]
DURATION=7
[ANIM_SEQ_10]
DURATION=7
; =============================
; === AERO CONTROL SURFACES ===
; =============================
; === Ailerons ===
[ANIM_COMP_0]
SEQ=0
GROUPS=32
ROT_PNT=(0,4.86,-9.13)
ROT_AXIS=(1,0,0)
ANGLE=-30
[ANIM_COMP_1]
SEQ=1
GROUPS=33
ROT_PNT=(0,4.86,-9.13)
ROT_AXIS=(1,0,0)
ANGLE=30
; === Elevator ===
[ANIM_COMP_2]
SEQ=2
GROUPS=32,33
ROT_PNT=(0,4.86,-9.9)
ROT_AXIS=(1,0,0)
ANGLE=30
; === Rudders ===
[ANIM_COMP_3]
SEQ=3
GROUPS=31
RANGE=(0,1)
ROT_PNT=(0,4.71,-10.3)
ROT_AXIS=(0,1,-0.5);
ANGLE=-40
; === Doors ===
[ANIM_COMP_4]
SEQ=4
GROUPS=25
ROT_PNT=(-1.78,0.52,0)
ROT_AXIS=(0,0,1)
ANGLE=-90
[ANIM_COMP_5]
SEQ=4
GROUPS=26
ROT_PNT=(1.78,0.52,0)
ROT_AXIS=(0,0,1)
ANGLE=90
; === Cone ===
[ANIM_COMP_6]
SEQ=5
GROUPS=65
RANGE=(0,0.2)
TYPE=TRANSLATE
SHIFT0=(0,0,0)
SHIFT=(0,0,0.03)
[ANIM_COMP_7]
SEQ=5
GROUPS=65
RANGE=(0.2,0.8)
ROT_PNT=(0,-0.78,10.52)
ROT_AXIS=(1,0,0)
ANGLE=150
[ANIM_COMP_8]
;docktunnel
SEQ=5
GROUPS=6
RANGE=(0.8,1)
TYPE=SCALE
SCALE=(1,1,4.7)
REF=(0,-0.25,10.4)
; ====================
; === LANDING GEAR ===
; ====================
[ANIM_COMP_9]
;wheel door left outer
SEQ=6
GROUPS=42
RANGE=(0.0,0.2)
ROT_PNT=(-5.76,-0.14,1.23)
ROT_AXIS=(0,0,1)
ANGLE=-90
[ANIM_COMP_10]
;wheel door left inner
SEQ=6
GROUPS=43
RANGE=(0.0,0.2)
ROT_PNT=(-4.08,-0.14,1.23)
ROT_AXIS=(0,0,1)
ANGLE=90
[ANIM_COMP_11]
;wheel door right outer
SEQ=6
GROUPS=58
RANGE=(0.0,0.2)
ROT_PNT=(5.76,-0.14,1.23)
ROT_AXIS=(0,0,1)
ANGLE=90
[ANIM_COMP_12]
;wheel door right inner
SEQ=6
GROUPS=57
RANGE=(0.0,0.2)
ROT_PNT=(4.08,-0.14,1.23)
ROT_AXIS=(0,0,1)
ANGLE=-90
[ANIM_COMP_13]
;wheels and axes back
SEQ=6
GROUPS=41,44,45,46,47,51,52,53,54,55
RANGE=(0.1,1)
ROT_PNT=(0,0.47,-0.77)
ROT_AXIS=(1,0,0)
ANGLE=90
[ANIM_COMP_14]
;wheels and axes front rot
SEQ=6
GROUPS=7,12,13,14,49
RANGE=(0.2,0.8)
ROT_PNT=(0,-0.71,9.43)
ROT_AXIS=(1,0,0)
ANGLE=-100
[ANIM_COMP_15]
;wheel door front left
SEQ=6
GROUPS=8
RANGE=(0.0,0.2)
ROT_PNT=(0.55,-1.16,8.44)
ROT_AXIS=(0,0,1)
ANGLE=90
[ANIM_COMP_16]
;wheel door front right
SEQ=6
GROUPS=9
RANGE=(0.1,0.3)
ROT_PNT=(-0.55,-1.16,8.44)
ROT_AXIS=(0,0,1)
ANGLE=-90
[ANIM_COMP_17]
;wheels and axes front trans
SEQ=6
GROUPS=7,12,13,14
RANGE=(0.8,1)
TYPE=TRANSLATE
SHIFT0=(0,0,0)
SHIFT=(0,-0.75,0.13)
; =====================
; === outer airlock ===
; =====================
[ANIM_COMP_18]
SEQ=7
GROUPS=16
RANGE=(0,1)
TYPE=SCALE
SCALE=(0.5,0.5,0)
REF=(0,0.235,10.35)
[ANIM_COMP_19]
SEQ=7
GROUPS=16
RANGE=(0,1)
TYPE=TRANSLATE
SHIFT=(0,0.8,0)
; =====================
; === inner airlock ===
; =====================
[ANIM_COMP_20]
SEQ=8
GROUPS=17
RANGE=(0,1)
ROT_PNT=(0.51,0.42,9.58)
ROT_AXIS=(0,1,0)
ANGLE=-90
; =====================
; === CARGO winch ===
; =====================
[ANIM_COMP_21]
SEQ=9
RANGE=(0,1)
GROUPS=67
TYPE=SCALE
SCALE=(1,120,1)
REF=(0,1.76,-0.2)
[ANIM_COMP_22]
SEQ=9
RANGE=(0,1)
Groups=93
TYPE=TRANSLATE
SHIFT=(0,-23.89,0)
[ANIM_COMP_23]
SEQ=10
RANGE=(0,1)
TIP_1=(0,1.8,-0.22)
TIP_2=(0,0.8,-0.22)
TIP_3=(0,1.8,-1.22)
ROT_AXIS=(0,1,0)
ROT_PNT=(0,1,-0.22)
ANGLE=360
PARENT=22
[ROBOTIC_ARM]
JOINT_0_NAME="Winch"
JOINT_0_SEQ=9
JOINT_0_RANGE=(0,100)
JOINT_1_NAME="Winch rot"
JOINT_1_SEQ=10
JOINT_1_RANGE=(0,360)
GRAP_SEQ=10
GRAP_ATTACH=0
[PARENT_ATTACH_0]
NAME="winch"
POS=(0,0,0)
DIR=(0,0,1)
ROT=(0,1,0)
LOOSE=0
RANGE=20
ID="GS"
; ============================================
; ========================================
; ======================================
; ===== ENGINE AND RCS ANIMATIONS =====
; ======================================
; =====================================================
[EX_MAIN_0]
OFF=(-4.95,0.55,-4.2)
DIR=(0,0,-1)
LENGTH=8
WIDTH=0.8
[EX_MAIN_1]
OFF=(4.95,0.55,-4.2)
DIR=(0,0,-1)
LENGTH=8
WIDTH=0.8
[EX_RETRO_0]
OFF=(-4.95,0.55,5.2)
DIR=(0,0,1)
LENGTH=4
WIDTH=0.4
[EX_RETRO_1]
OFF=(4.95,0.55,5.2)
DIR=(0,0,1)
LENGTH=4
WIDTH=0.4
[EX_HOVER_0]
OFF=(-8.95,0.74,3.7)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_1]
OFF=(-8.95,0.74,2.4)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_2]
OFF=(-8.95,0.74,1.5)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_3]
OFF=(-8.95,0.74,0.65)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_4]
OFF=(-8.95,0.74,-0.9)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_5]
OFF=(8.95,0.74,3.7)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_6]
OFF=(8.95,0.74,2.4)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_7]
OFF=(8.95,0.74,1.5)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_8]
OFF=(8.95,0.74,0.65)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_HOVER_9]
OFF=(8.95,0.74,-0.9)
DIR=(0,-1,0)
LENGTH=4
WIDTH=0.2
[EX_ATT_0]
OFF=(0.05,0.85,10.45)
DIR=(0,1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_1]
OFF=(-0.05,0.85,10.45)
DIR=(0,1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_2]
OFF=(0.05,-0.85,10.45)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_3]
OFF=(-0.05,-0.85,10.45)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_4]
OFF=(0.05,2.34,-11.45)
DIR=(0,1,0)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_5]
OFF=(-0.05,2.34,-11.45)
DIR=(0,1,0)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_6]
OFF=(0.05,1.9,-11.45)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_7]
OFF=(-0.05,1.9,-11.45)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
; =+=+
[EX_ATT_8]
OFF=(-9,2.65,1.08)
DIR=(0,1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_9]
OFF=(9,2.65,1.08)
DIR=(0,1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_10]
OFF=(9,0.75,1.08)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_11]
OFF=(-9,0.75,1.08)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_12]
OFF=(-9,2.65,1.97)
DIR=(0,1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_13]
OFF=(9,2.65,1.97)
DIR=(0,1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_14]
OFF=(9,0.75,1.97)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_15]
OFF=(-9,0.75,1.97)
DIR=(0,-1,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Z
ROT_CW=0
; =+=+=
[EX_ATT_16]
OFF=(-0.85,-0.02,10.45)
DIR=(-1,0,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=0
[EX_ATT_17]
OFF=(0.85,-0.02,10.45)
DIR=(1,0,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=1
[EX_ATT_18]
OFF=(-0.2,2.16,-11.45)
DIR=(-1,0,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=0
[EX_ATT_19]
OFF=(0.2,2.16,-11.45)
DIR=(1,0,0)
LENGTH=0.4
WIDTH=0.05
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=1
; =+=+=
[EX_ATT_20]
OFF=(-9,1.97,5.26)
DIR=(0,0,1)
LENGTH=0.4
WIDTH=0.05
LIN_AXIS=Z
LIN_CW=1
[EX_ATT_21]
OFF=(9,1.97,5.26)
DIR=(0,0,1)
LENGTH=0.5
WIDTH=0.05
LIN_AXIS=Z
LIN_CW=1
[EX_ATT_22]
OFF=(-9,1.97,-2.56)
DIR=(0,0,-1)
LENGTH=0.4
WIDTH=0.05
LIN_AXIS=Z
LIN_CW=0
[EX_ATT_23]
OFF=(9,1.97,-2.56)
DIR=(0,0,-1)
LENGTH=0.4
WIDTH=0.05
LIN_AXIS=Z
LIN_CW=0
