SCS Electronics pwr sw

[meik84]

One thing I just came along: in the sim, the SCS elec pwr sw has to be in ECA for the FDAIs to work. That's wrong. According to the schematics, the ECA has nothing to do with the FDAI att selection logic. You need it for a lot of things -but not for this.

 

[indy91]

The IMU driven FDAI is still working with that switch set to off. The GDC of course has no power, so the second FDAI wouldn't display anything.

 

[meik84]

The IMU driven FDAI is still working with that switch set to off.

Just tried it again: nope. It works when I switch to ECA, so that issue's still there...

 

[indy91]

I don't know what to tell you, the IMU driven FDAI is working fine for me, even with the SCS electronics power switch set to off. Are you using a fairly recent NASSP version? Also, try cycling the SCS logic bus breakers and the Logic Power 2/3 switch, I vaguely remember that certain old scenarios had an issue where something wasn't properly saved, which would only get fixed by cycling the switch (or the breakers, can't really remember).

 

[meik84]

Strange. Now everything works like it should be. Didn't do anything, no updates, no nothing.:huh: Thanks anyway. Things between heaven and earth I don't get, part 2389...