OHM US ISS A to Z v.3

Donamy · Apr 2, 2017

Add this to the S0_truss.ini

Code:

[PARENT_ATTACH_9]    ; WIF 34
NAME="WIF34"
POS=(0.985,-1.45,-0.628)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

Then make the attachment

Code:

APFR8:ISSR\APFR
STATUS Orbiting Earth
RPOS 5399606.49 -4063428.75 518891.89
RVEL -4562.723 -5791.375 2108.471
AROT -85.78 -61.25 -167.24
VROT 0.00 -0.06 0.00
ATTACHED 0:9,S0_truss
AFCMODE 7
NAVFREQ 0 0
SH1 0 1.0000 0
SH2 1 0.7712 0
SH3 1 0.6228 0
SH5 0.5000 0.5000
POS0 -0.03 0.24 -0.36
DIR0 0.05 0.33 0.94
ROT0 -0.99 0.14 -0.00
POS1 0.00 0.35 -0.05
DIR1 0.00 0.00 1.00
ROT1 0.00 1.00 -0.00
END

---------- Post added at 09:53 PM ---------- Previous post was at 08:59 PM ----------

A more accurate position on the S0 would be.

Code:

[PARENT_ATTACH_9]    ; WIF 34
NAME="WIF34"
POS=(0.985,-1.45,-0.628)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

Donamy · Apr 2, 2017

Would look something like this

gattispilot · Apr 3, 2017

What eva guy are using? Looks like the arms move?

Donamy · Apr 3, 2017

It is included in the ISS A2Z addon.

gattispilot · Apr 3, 2017

OK. Would a DLL version be something worth while of it. So like a dialogue box like the RMs for the animation?
I think I could make one

pappy2 · Apr 3, 2017

Thank you "Donamy" for your answer
That's exactly what I wanted

I test very quickly
thanks again

=== EDIT ===========================

Good I have a CTD with Orbiter
Here is the Orbiter.log

**** Orbiter.log
Build Aug 30 2010 [v.100830]
Timer precision: 6.98413e-008 sec
Found 0 joystick(s)
Module AtlantisConfig.dll .... [Build 100830, API 100830]
Module AtmConfig.dll ......... [Build 100830, API 100830]
Module DGConfigurator.dll .... [Build 100830, API 100830]
Module CamShake.dll .......... [Build 100811, API 100606]
Module OrbiterSound.dll ...... [Build 121120, API 100830]
Module ExtMFD.dll ............ [Build 100830, API 100830]
Module ScnEditor.dll ......... [Build 100830, API 100830]
Module Rcontrol.dll .......... [Build 100830, API 100830]
Module CustomMFD.dll ......... [Build 100830, API 100830]
Module LuaMFD.dll ............ [Build 100830, API 100830]
Module InterMFD55.dll ........ [Build 100826, API 100704]
---------------------------------------------------------------
>>> WARNING: Obsolete API function used: oapiRegisterMFDMode
At least one active module is accessing an obsolete interface function.
Addons which rely on obsolete functions may not be compatible with
future versions of Orbiter.
---------------------------------------------------------------
Module D3D9Client.dll ........ [Build 150111, API 100830]
Module AttitudeMFD.dll ....... [Build ******, API 060425]
Module BaseSyncMFD.dll ....... [Build 100616, API 100603]
Module uap.dll ............... [Build 110613, API 100830]
Error loading module Modules\Plugin\GPCMFD.dll (code 126)

**** Creating simulation session
D3D9Client: [DirectX 9 Initialized]
D3D9Client: Sytem has XNA math support
D3D9Client: [3DDevice Initialized]
D3D9Client: [Loading Stars]
D3D9Client: [Loading Constellations]
D3D9Client: [D3D9Client Initialized]
Module Sun.dll ............... [Build 100830, API 100830]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
Module Mercury.dll ........... [Build 100830, API 100830]
VSOP87(B) Mercury: Precision 1e-005, Terms 167/7123
Module Venus.dll ............. [Build 100830, API 100830]
Module VenusAtm2006.dll ...... [Build 100830, API 100830]
VSOP87(B) Venus: Precision 1e-005, Terms 79/1710
Module Earth.dll ............. [Build 100830, API 100830]
Module EarthAtmJ71G.dll ...... [Build 100830, API 100830]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
Module Moon.dll .............. [Build 100830, API 100830]
ELP82: Precision 1e-005, Terms 116/829
Module Mars.dll .............. [Build 100830, API 100830]
Module MarsAtm2006.dll ....... [Build 100830, API 100830]
VSOP87(B) Mars: Precision 1e-005, Terms 405/6400
Module Phobos.dll ............ [Build ******, API 060425]
Module Deimos.dll ............ [Build ******, API 060425]
Module Galsat.dll ............ [Build 100217, API 100215]
Module Jupiter.dll ........... [Build 100830, API 100830]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
Module Io.dll ................ [Build 100217, API 100215]
Module Europa.dll ............ [Build 100217, API 100215]
Module Ganymede.dll .......... [Build 100217, API 100215]
Module Callisto.dll .......... [Build 100217, API 100215]
Module Satsat.dll ............ [Build 100215, API 100212]
Module Saturn.dll ............ [Build 100830, API 100830]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
Module Mimas.dll ............. [Build 100215, API 100212]
SATSAT Mimas: Terms 113
Module Enceladus.dll ......... [Build 100215, API 100212]
SATSAT Enceladus: Terms 33
Module Tethys.dll ............ [Build 100215, API 100212]
SATSAT Tethys: Terms 101
Module Dione.dll ............. [Build 100215, API 100212]
SATSAT Dione: Terms 59
Module Rhea.dll .............. [Build 100215, API 100212]
SATSAT Rhea: Terms 68
Module Titan.dll ............. [Build 100215, API 100212]
SATSAT Titan: Terms 100
Module Iapetus.dll ........... [Build 100215, API 100212]
SATSAT Iapetus: Terms 605
Module Uranus.dll ............ [Build 100830, API 100830]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
Module Miranda.dll ........... [Build ******, API 060425]
Module Ariel.dll ............. [Build ******, API 060425]
Module Umbriel.dll ........... [Build ******, API 060425]
Module Titania.dll ........... [Build ******, API 060425]
Module Oberon.dll ............ [Build ******, API 060425]
Module Neptune.dll ........... [Build 100830, API 100830]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
Finished initialising world
Module Zarya.dll ............. [Build 100904, API 100830]
Module Spacecraft3.dll ....... [Build ******, API 060425]
---------------------------------------------------------------
>>> WARNING: Obsolete API function used: VESSEL::SetBankMomentScale
At least one active module is accessing an obsolete interface function.
Addons which rely on obsolete functions may not be compatible with
future versions of Orbiter.
---------------------------------------------------------------
Module Zvezda.dll ............ [Build 100904, API 100830]
Vertex index out of range Face=68, MeshGroup=420
Vertex index out of range Face=69, MeshGroup=420
Module APFR.dll .............. [Build 100902, API 100830]
Module Pirs.dll .............. [Build 100904, API 100830]
**** WARNING: Mesh not found: .\Meshes\dummy-1.msh
D3D9Client::clbkStoreMeshPersistent(dummy-1) hMesh is NULL
Module Strela.dll ............ [Build 100904, API 100830]
Module SSRMSD.dll ............ [Build 151126, API 100830]
Added subsystem LEE1.
Added subsystem LEE2.
@SUBSYSTEM LEE1
@SUBSYSTEM LEE2
Module CMG2.dll .............. [Build 110727, API 100830]
Module spotlight.dll ......... [Build 110622, API 100830]
**** WARNING: Mesh not found: .\Meshes\lightpole.msh
D3D9Client::clbkStoreMeshPersistent(lightpole) hMesh is NULL
Module OTD.dll ............... [Build 100904, API 100830]
Module dragon1_capsule.dll ... [Build 160623, API 100830]
Module recovery_vessel.dll ... [Build 160106, API 100830]
Module Progress_M1.dll ....... [Build 100902, API 100830]
---------------------------------------------------------------
>>> WARNING: Obsolete API function used: oapiGetAtmPressureDensity
At least one active module is accessing an obsolete interface function.
Addons which rely on obsolete functions may not be compatible with
future versions of Orbiter.
---------------------------------------------------------------

An idea ?

Donamy · Apr 3, 2017

try using the SC3 APFR1 that comes with ISS A2Z.

---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------

gattispilot said:
OK. Would a DLL version be something worth while of it. So like a dialogue box like the RMs for the animation?
I think I could make one

Go ahead if you wish. I think someone did a long time ago, but I'm not sure.

There are a number of animationsn the .ini. Let me know if you need more info.

pappy2 · Apr 4, 2017

Donamy said:
try using the SC3 APFR1 that comes with ISS A2Z.

Good evening "donamy",
I tested with SC3APFR1, in fact it exists well as well as APFR3.

But when I want to attach them on S0Truss with ATTACHED 0: 9, S0_truss
I have a CTD

I do not understand why ?

Pappy2

Donamy · Apr 5, 2017

I think I confused you. I meant just APFR1 . SC3 stands for Spacecraft 3.

gattispilot · Apr 5, 2017

Well I started playing with your eva guy. I f3 to Eva Tether. But when I f1 I get a ctd. Looks like I might be missing meshes.

So how do you do a eva?

pappy2 · Apr 5, 2017

gattispilot said:
Well I started playing with your eva guy. I f3 to Eva Tether. But when I f1 I get a ctd. Looks like I might be missing meshes.

So how do you do a eva?

Hello "gattispilo"

Perhaps your answer here

http://www.orbiter-forum.com/showthread.php?t=6365&page=20

Post 298

gattispilot · Apr 5, 2017

Thanks. So do I just create a Eva Vessel? Or do I go to a Module and Press E?

pappy2 · Apr 5, 2017

gattispilot said:
Thanks. So do I just create a Eva Vessel? Or do I go to a Module and Press E?

Actually for now I just created scenarios with the astronaut standing on the APFR :lol:

---------- Post added at 06:50 PM ---------- Previous post was at 06:42 PM ----------

Donamy said:
I think I confused you. I meant just APFR1 . SC3 stands for Spacecraft 3.

Good evening "Donamy"
Sorry for my misunderstanding.

I use:
SPACECRAFT 1 to 3 of «Vinka's»
STAGE and MULTISTAGE of «Vinka's»
Multistage2015 - for Orbiter 2010P1 of "fred18"

I have other APFR installed on the ISS, and no problem.
Just when I want to attach them on S0Truss with

...............................

ATTACHED 0: 9, S0_truss
...................................
I have a CTD

Donamy · Apr 6, 2017

Did you place the new parent attachment into the S0_truss.ini ?

pappy2 · Apr 6, 2017

Donamy said:
Did you place the new parent attachment into the S0_truss.ini ?

Here is my file

Code:

[CONFIG]
MESHNAME="S0_truss" 
EMPTY_MASS=1814  
SIZE=5

[DOCK_0]           ;to Destiny
POS=(-2.072,-0.673,0.00)
DIR=(1,0,0)
ROT=(0,0,1)

[DOCK_1]           ;to S1
POS=(0.00,0.0,-6.58)
DIR=(0,0,1)
ROT=(0,1,0)

[DOCK_2]           ;to P1
POS=(0.00,0.0,6.58)
DIR=(0,0,-1)
ROT=(0,1,0)

[PARENT_ATTACH_0]	;to node1 wire tray 
NAME="wire_tray"
POS=(-2.05,-0.29,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_1]	;to MTS
NAME="MTS"
POS=(0,-1.644,-0.027)
DIR=(0,-1,0)
ROT=(1,0,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_2]	;to CPDS
NAME="CPDS"
POS=(1.93,0.266,-4.525)
DIR=(-1,0,0)
ROT=(0,0,-1)
LOOSE=0
ID="XS"

[COLOR="Blue"][PARENT_ATTACH_9]       ; WIF 34
NAME="WIF34"
POS=(0.985,-1.45,-0.628)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"[/COLOR]

[CHILD_ATTACH_0]	;to bay 
NAME="PLBY"
POS=(0,0,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[CHILD_ATTACH_1]	;Grapple
NAME="grapple"
POS=(0,0,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="GS"

;-----------------------------------
;       animation sequences


[ANIM_SEQ_0]  
;strut attach
KEY=1
DURATION=8

;-------------------------------------
;         animations
;
;        strut attach

[ANIM_COMP_0]  ;Port forward struts
SEQ=0
GROUPS=0,1
RANGE=(0.,1.)
ROT_PNT=(-1.083,-1.411,0.891)
ROT_AXIS=(0.0486822,-0.0509376,-0.997515)
ANGLE=-50.

[ANIM_COMP_1]  ;Stbd forward struts
SEQ=0
GROUPS=2,3
RANGE=(0.,1.)
ROT_PNT=(-1.083,-1.411,-0.927)
ROT_AXIS=(-0.0486822,0.0509376,-0.997515)
ANGLE=-50.

[ANIM_COMP_2]  ;Z1 tray
SEQ=0
GROUPS=24
RANGE=(0.,1.)
ROT_PNT=(-1.75,0.37,0.04)
ROT_AXIS=(0,0,1)
ANGLE=40.

[ANIM_COMP_3]  ;Port aft strut
SEQ=0
GROUPS=5,6
RANGE=(0.,1.)
ROT_PNT=(-1.57,0.85,1.72)
ROT_AXIS=(0.636021,0.771672,0.000229885)
ANGLE=-80.

[ANIM_COMP_4]  ;Port aft strut
SEQ=0
GROUPS=4
RANGE=(0.,1.)
ROT_PNT=(-1.99,0.49,3.45)
ROT_AXIS=(0.633403,0.773529,0.0212909)
ANGLE=115.
PARENT=3

[ANIM_COMP_5]  ;Port aft strut
SEQ=0
GROUPS=7,8
RANGE=(0.,1.)
ROT_PNT=(-1.57,0.85,-1.72)
ROT_AXIS=(0.636021,0.771672,-0.000229885)
ANGLE=80.

[ANIM_COMP_6]  ;Port aft strut
SEQ=0
GROUPS=9
RANGE=(0.,1.)
ROT_PNT=(-1.99,0.49,-3.45)
ROT_AXIS=(-0.633403,-0.773528,0.021336)
ANGLE=115.
PARENT=5

;

[ANIM_SEQ_1]  
;keel stow
KEY=2
DURATION=8

[ANIM_COMP_7]  ;front keel translate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.,0.05)
TYPE=TRANSLATE
SHIFT=(0,0.0,-8.2365)

[ANIM_COMP_8]  ;front keel rotate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.05,0.1)
ROT_PNT=(0.0,-2.65,-4.09)
ROT_AXIS=(0,0,1)
ANGLE=90.

[ANIM_COMP_9]  ;aft keel rotate
SEQ=1
GROUPS=10,11,12,13,15
RANGE=(0.15,0.2)
ROT_PNT=(0.0,-2.65,-4.09)
ROT_AXIS=(0,0,1)
ANGLE=-90.

[ANIM_COMP_10]  ;2 keel translate
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.25,0.3)
TYPE=TRANSLATE
SHIFT=(0,0.0,-0.81)

[ANIM_COMP_11]  ;2 keel translate up
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.35,0.4)
TYPE=TRANSLATE
SHIFT=(0,3.198,0.0)

[ANIM_COMP_12]  ;front keel 2nd rotate
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.45,0.5)
ROT_PNT=(0.0,1.24,-4.82)
ROT_AXIS=(-0.999559,-0.00447614, 0.0293614)
ANGLE=-58.5

[ANIM_COMP_13]  ;Aft keel 3rd rotate
SEQ=1
GROUPS=10,11,12,13,15
RANGE=(0.55,0.6)
ROT_PNT=(1.0,1.29,-4.86)
ROT_AXIS=(-0.0148948,-0.830602, 0.556667)
ANGLE=20.

[ANIM_COMP_14]  ;front keel 3rd rotate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.55,0.6)
ROT_PNT=(-1.0,1.29,-4.86)
ROT_AXIS=(0.0148948,-0.830602, 0.556667)
ANGLE=-20.

[ANIM_COMP_15]  ;Aft keel support rotate
SEQ=1
GROUPS=14
RANGE=(0.0,1.0)
ROT_PNT=(0.57,-1.67,-1.77)
ROT_AXIS=(-0.954298,0.00899054,0.298722)
ANGLE=-110.

[ANIM_COMP_16]  ;front keel support rotate
SEQ=1
GROUPS=21
RANGE=(0.0,1.0)
ROT_PNT=(0.57,-1.67,6.48)
ROT_AXIS=(0.954298,-0.00899054, -0.298722)
ANGLE=88.

;-----------------------------------
;      airlock spur animation 

[ANIM_SEQ_2]  
;airlock spur deploy
KEY=3
DURATION=8

[ANIM_COMP_17]  ;airlock spur deploy
SEQ=2
GROUPS=22,23
RANGE=(0.0,0.5)
ROT_PNT=(-2.19,0.04,-6.63)
ROT_AXIS=(0,0,1)
ANGLE=116.

[ANIM_COMP_18]  ;airlock spur deploy
SEQ=2
GROUPS=22,23
RANGE=(0.55,1)
ROT_PNT=(-2.13,0.02,-6.63)
ROT_AXIS=(1,0,0)
ANGLE=40.

Donamy · Apr 7, 2017

In your case make it

Code:

[PARENT_ATTACH_3] ; WIF 34
NAME="WIF34"
POS=(0.985,-1.45,-0.628)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

pappy2 · Apr 7, 2017

Donamy said:
In your case make it

Code:

[PARENT_ATTACH_3] ; WIF 34 NAME="WIF34" POS=(0.985,-1.45,-0.628) DIR=(0.773582,-0.633696,0) ROT=(0,0,1) LOOSE=0 ID="XS"

Good evening "donamy"

everything is OK :thumbup:

APFR8:ISSR\APFR
STATUS Orbiting Earth
RPOS 5399606.49 -4063428.75 518891.89
RVEL -4562.723 -5791.375 2108.471
AROT -85.78 -61.25 -167.24
VROT 0.00 -0.06 0.00
ATTACHED 0:3,S0_truss
AFCMODE 7
NAVFREQ 0 0
SH1 0 1.0000 0
SH2 1 0.7712 0
SH3 1 0.6228 0
SH5 0.5000 0.5000
POS0 -0.03 0.24 -0.36
DIR0 0.05 0.33 0.94
ROT0 -0.99 0.14 -0.00
POS1 0.00 0.35 -0.05
DIR1 0.00 0.00 1.00
ROT1 0.00 1.00 -0.00
END

With this in my APFR scenario is in the center of S0_truss

On the other hand APFR it is not quite in good position
you can help me

Still miles thank you :thumbup: :thumbup:
Pappy2

Donamy · Apr 7, 2017

Can you post a shot of the attachment arrows ?

pappy2 · Apr 7, 2017

Donamy said:
Can you post a shot of the attachment arrows ?

Good evening "donamy"

Here is a picture of the bottom and front

Donamy · Apr 8, 2017

Can yoou post the config file of the APFR ?

Orbiter 2024 has been released!

OHM US ISS A to Z v.3

Addon Developer

Addon Developer

Attachments

Addon Developer

Addon Developer

Addon Developer

Active member

Addon Developer

Active member

Addon Developer

Addon Developer

Active member

Addon Developer

Active member

Addon Developer

Active member

Addon Developer

Active member

Addon Developer

Active member

Addon Developer

Similar threads