Space Shuttle Ultra 1.25 Revision B development

[SiameseCat]

After checking the Rendezvous test scenario, and it doesn't have this problem I would say that the problem is with the Atlantis in orbit scenario.

Your posts earlier indicate that the problem occurs even after loading a scenario saved by SSU. In this case, the problem isn't with the initial scenario.

---------- Post added at 06:43 PM ---------- Previous post was at 06:33 PM ----------

Here you go:

The RMS values are the same as in the original scenario, so the scenario loading code is fine. I'd really like to know if anyone else can reproduce this issue, since I can't.

 

[DaveS]

Your posts earlier indicate that the problem occurs even after loading a scenario saved by SSU. In this case, the problem isn't with the initial scenario.

---------- Post added at 06:43 PM ---------- Previous post was at 06:33 PM ----------


The RMS values are the same as in the original scenario, so the scenario loading code is fine. I'd really like to know if anyone else can reproduce this issue, since I can't.

So you can't reproduce it with the Atlantis in orbit scenario? That's the only scenario I have been able to get the problem in. Maybe we should shelve this issue until someone can reproduce it?

 

[SiameseCat]

Atlantis in orbit works fine for me. Let's shelve this unless someone else also has this issue.

 

[DaveS]

Another item that I just remembered that needs fixing before release: CCTV camera pan/tilt orientation. Currently tilt is +90° off so that 0 in tilt is along the +Z axis instead of along the X axis. Pan is good through.

 

[Donamy]

I'd like to help, but I can't seem to get SSU working at all.

 

[DaveS]

I'd like to help, but I can't seem to get SSU working at all.

What are the troubles? Things are working nicely here, except for that weird deal with the EE status TBs.

---------- Post added at 12:56 AM ---------- Previous post was at 12:11 AM ----------

I checked in new meshes for the orbiter, ODS, External Airlock, Ku antenna and the RMS. Plenty of fixes and changes. I think the positions for the RMS joints needs to be updated. My next item on the list fixing the positions of the starboard MPMs.

 

[Donamy]

I'm getting, ERROR: Can't load aerodynamics file

I have revision 1333

 

[DaveS]

I'm getting, ERROR: Can't load aerodynamics file

I have revision 1333

Have you tried a SVN Update on your main SSU installation folder? This should retrieve any missing files from the repository.

 

[Donamy]

Yes, It says revision 1333, is this correct ?

 

[DaveS]

Yes, It says revision 1333, is this correct ?

No. Current revision is 1366. Are you using the old way that doesn't require log-in to perform a SVN Update and other actions?

 

[Donamy]

probably

 

[DaveS]

probably

In that case, right click on your SSU installation folder and go TortoiseSVN>Relocate. In the window that pops up enter this: svn+ssh://[email protected]/p/shuttleultra/code where you replace USERNAME with your SourceForge username. Then click OK.

 

[Donamy]

It's asking for a password.

 

[DaveS]

It's asking for a password.

Do you remember the password for your SourceForge account? If not, go here to recover it: https://sourceforge.net/account/registration/recover.php

 

[Donamy]

Recovered password, but not changing the location.

 

[DaveS]

Recovered password, but not changing the location.

I had that problem as well. Ended up doing a new checkout on a new folder.

 

[Donamy]

I can view all the files in the trunk, how do you download them ?

 

[DaveS]

I can view all the files in the trunk, how do you download them ?

The same way you did before. Just use TortoiseSVN and do a fresh checkout in a new folder.

 

[Donamy]

Finally downloading now, thanks for all the help. Why all the repeat folders in the branches/entryguidance folder ?

---------- Post added at 02:24 AM ---------- Previous post was at 02:21 AM ----------

up to 300 mb now.

 

[Donamy]

It's broken !!